Mazda Rotary Club

Cars by Model Type => 3rd generation RX-7's => Topic started by: rx7_andy on May 24, 2007, 11:40:57 AM

Title: little advice
Post by: rx7_andy on May 24, 2007, 11:40:57 AM
would 6k get me a rebuilt engine and a single turbo with all the bits i need? thanks :Thumbsup!
Title: little advice
Post by: rx7_andy on May 24, 2007, 11:51:08 AM
looking for about 400bhp at the fly
Title: little advice
Post by: sadgoth on May 24, 2007, 12:28:42 PM
possible, but would be cutting it a biy fine on the finance front I would suspect.

Depends on if you sourced the parts yourself I guess, what turbo you were going for and what ancillaries you would need.
Title: little advice
Post by: mazda bait on May 24, 2007, 04:56:48 PM
If your after a turbo this might be the way forward

http://horsepowerinabox.com/HPIAB2/index.html

Seem about the most reasonable you\'ll find...

Good luck:driving
Title: little advice
Post by: ttpower on May 25, 2007, 03:53:44 PM
really depends on how much your rebuild is going to cost? and its hard to determine that until the engine is stripped, but worse case scenario id say you get 400bhp on the fly with 6k.