Mazda Rotary Club

Cars by Model Type => 3rd generation RX-7's => Topic started by: marktyper on January 17, 2004, 10:59:18 PM

Title: changing plug leads
Post by: marktyper on January 17, 2004, 10:59:18 PM
how and whats the easiest way of changing the leads in my type r cause changing the plugs was a right bloody job
Title: changing plug leads
Post by: Fishy on January 18, 2004, 09:35:44 AM
If you think the plugs were a pain, then the leads are even worse. I think from memory you have to remove the throttle body.

Dan
Title: changing plug leads
Post by: jonrx7uk on January 20, 2004, 02:04:49 PM
Yes, throttle body has to come off...

marktyper, where are you going to get the leads from?
Title: changing plug leads
Post by: davefrith on January 20, 2004, 02:10:04 PM
Mark

Have you even got the car started yet mate ?
Title: changing plug leads
Post by: marktyper on January 20, 2004, 03:32:00 PM
no car is still dead think the battery needs replacing doesnt seem to turn over fast enough and battery is dead before it gets a chance cleared the flooding twice but still no luck
Title: changing plug leads
Post by: davefrith on January 20, 2004, 03:33:30 PM
you got RAC ? just get them to take it to a rotary garage near you

easy solution if you have the cover

Dave
Title: changing plug leads
Post by: marktyper on January 20, 2004, 03:36:16 PM
there is no garage close do you think the battery could be the solution i read somewhere that someone tried jumping with a landrover but no joy
Title: changing plug leads
Post by: davefrith on January 20, 2004, 03:38:37 PM
assuming its flooded then the battery needs to be fully charged to be able to sort it out, if its dying too quickly then replace the battery then try and again

if you have RAC/AA they will take it to the garage of your choice, it dosen\'t sound like you are getting anywhere with it

where abouts are you

Dave
Title: changing plug leads
Post by: marktyper on January 20, 2004, 03:41:37 PM
derbyshire my mate has rac were gonna give it a try in a bit i know pistons but struggling with rotors
Title: changing plug leads
Post by: davefrith on January 20, 2004, 03:44:22 PM
best way I reckon mate, call them out get them to try and fix it, if they can great if they can\';t they\'ll take it somewhere who will

i think they even take it to a garage of your choice so you\'ll make it to a rotary specialist

Good Luck

Dave
Title: changing plug leads
Post by: marktyper on January 20, 2004, 03:48:14 PM
ok mate i will see how they get on getting pissed off with removing the spark plugs all day because they keep coming back out wet after trying to jump it
Title: changing plug leads
Post by: Fishy on January 20, 2004, 05:36:06 PM
Plug the car up to a diessel engine battery, they have plenty of power to share. ;)

Dan
Title: changing plug leads
Post by: scooby_si on January 20, 2004, 06:12:48 PM
where abouts in derbyshire are ya mate?
SI