Mazda Rotary Club

Cars by Model Type => 3rd generation RX-7's => Topic started by: SavageUK on May 04, 2007, 07:03:29 PM

Title: Number Plate Question
Post by: SavageUK on May 04, 2007, 07:03:29 PM
Hello all,

As im under orders to move my number plate, i have aquired a number plate "sticker" of sorts. It is however the normal numberplate stuff, which is then usually attached to the hard plastic backing with a heat gun of some sort.

my problem is now attaching it to my car, with it not being a true sticker there is no sticky backing. What can i use to attach it? wouldnt want it damaging the car obviously if it had to come off for whatever reason ( if it takes much effort to get off but leaves the car ok, im good with that )

i leave my problem with you knowledgable folks :guinness

cheers,
Title: Number Plate Question
Post by: pete sparrow on May 04, 2007, 07:16:10 PM
Quote from: SavageUKHello all,

As im under orders to move my number plate, i have aquired a number plate "sticker" of sorts. It is however the normal numberplate stuff, which is then usually attached to the hard plastic backing with a heat gun of some sort.

my problem is now attaching it to my car, with it not being a true sticker there is no sticky backing. What can i use to attach it? wouldnt want it damaging the car obviously if it had to come off for whatever reason ( if it takes much effort to get off but leaves the car ok, im good with that )

i leave my problem with you knowledgable folks :guinness

cheers,
Hi
 Why don\'t you get a proper stick on one for under £20 off Jono at D-Sign Studio??? Personally i think you\'ll be happier with the results!

 If not then use double sided tape,motor factors sell it for sticking number plates onto bodywork.
Title: Number Plate Question
Post by: Jono FD3 on May 04, 2007, 07:54:04 PM
Hai-ho, if you\'re interested let me know!!
Cheers for the free plug pete ;)
How did the fitment of the graphics go?? Forgot to say I put some extra vinyl in if you wanted to cut a few more tairs!!!

Jono
Title: Number Plate Question
Post by: pete sparrow on May 04, 2007, 08:01:01 PM
Quote from: Jono FD3Hai-ho, if you\'re interested let me know!!
Cheers for the free plug pete ;)
How did the fitment of the graphics go?? Forgot to say I put some extra vinyl in if you wanted to cut a few more tairs!!!

Jono
Run out of time and light mate.Going to tackle it when i\'m feeling a little braver!!
Title: Number Plate Question
Post by: SavageUK on May 04, 2007, 08:15:19 PM
ah ok, double sided tape it is then. gonna see how it goes/looks, if its pants ill order one ;)
Title: Number Plate Question
Post by: Jono FD3 on May 04, 2007, 11:50:09 PM
Think you might find if it\'s not secured all over then the material will tair as it is very brittle!!

Jono