Text only | Text with Images

Mazda Rotary Club

General => General Technical => Topic started by: Clarky on April 12, 2007, 01:40:45 PM

Title: Engine refit
Post by: Clarky on April 12, 2007, 01:40:45 PM
I have refitted engine into car, mated up ok, the problem i have now is that the clutch plate is all loose in the bell housing, it wont turn so that i can bolt it up to the flywheel, any ideas please
Title: Engine refit
Post by: deanflowers on April 12, 2007, 02:16:26 PM
shouldnt you turn the flywheel to line up with the clutch?
Title: Engine refit
Post by: Clarky on April 12, 2007, 02:41:22 PM
Yes doing that now to line the pins and bolt holes, i forgot that :Hammer
Title: Engine refit
Post by: deanflowers on April 12, 2007, 03:13:29 PM
ive had many \'special\' moments doing my engine,
Text only | Text with Images