Print Page - air pump and speedo wire in dash

Title: air pump and speedo wire in dash
Post by: olly-civic on April 09, 2007, 07:53:21 PM

this week im fitting my twin filters and de-cat pipe, in the cat thers 2 pipes a big one and a tiny one? what do i do with these? and do i still need my air pump or do i have to take it off
also iv bought a little thingy to sort my speedo out but i dont know which the signal wire is in the back of the dash?
cheerz

Title: air pump and speedo wire in dash
Post by: olly-civic on April 10, 2007, 09:13:03 PM

i cant belive no one on here knows which one the speedo wire is or what the pipes do on the cat, madness :(

Title: air pump and speedo wire in dash
Post by: pdtaylor18 on April 10, 2007, 11:16:17 PM

the one pipe is the flow from the air pump,just disconnect it from the hose joint underneath and if you want just unplug the pump electrically. The other sensor just tuck it away unless you want to rip out whatever you have in the back of the car to feed the loom through the floor. Mine i just tucked it behind the heat shield. as for the wiring of the speedo thing then i will have to get back to you. do a search on here as its bound if not almost certain to have been raised before.

Title: air pump and speedo wire in dash
Post by: olly-civic on April 11, 2007, 08:47:13 AM

cheerz dude, have a had a scout round to see if theres any info on it but notcome up with much :(

Title: air pump and speedo wire in dash
Post by: olly-civic on April 11, 2007, 08:54:08 AM

found it now chaps, spot on

Title: air pump and speedo wire in dash
Post by: olly-civic on April 12, 2007, 08:42:33 PM

in thew tech bit it says thats its the 2nd on down in the right row of wire in the plug could be yellow or blue, well mine was blue and its not the speedo wire lol

Mazda Rotary Club

Cars by Model Type => 3rd generation RX-7's => Topic started by: olly-civic on April 09, 2007, 07:53:21 PM