Print Page - what goes here on the engine

Title: what goes here on the engine
Post by: ttpower on March 31, 2007, 08:58:44 PM

Hi people, bit of help needed, what goes on the holes cirlced below, im guessing the one on the right is the single turbo return line! what the middle thing, looks like a sensor of some kind and the holes on the left, are they just left blank?

(http://img1.putfile.com/thumb/3/8915572643.jpg) (http://www.putfile.com/pic.php?img=5113237)

Title: what goes here on the engine
Post by: antnicuk on March 31, 2007, 09:15:49 PM

bottom one is oil level sensor, one in the centre plate on the right is the water drain plug and just has a small bolt in it, i cant think what the left one is, maybe part of the aircon mount system. Both the oil returns are on the turbo side of the engine, unless you have you rotor housing in the wrong way round :)

Title: what goes here on the engine
Post by: ttpower on March 31, 2007, 10:03:14 PM

ah right, thanks mate, so where are the oil feed lines for a single turbo go??

Title: what goes here on the engine
Post by: davehg on March 31, 2007, 10:10:57 PM

same place as the oil feed for twins

Title: what goes here on the engine
Post by: Jit on April 01, 2007, 12:43:34 AM

the left ones are for the PAS bracket off memory. Im not 100% sure but should one them have a stud?

Title: what goes here on the engine
Post by: antnicuk on April 01, 2007, 08:06:06 AM

Quote from: one2watchIm not 100% sure but should one them have a stud?

thats what i\'m thinking, thats why it doesnt look right

The oil feed is on the top of the engine on the corner of the front plate at the passenger side. Held on with a banjo bolt.

Title: what goes here on the engine
Post by: ttpower on April 01, 2007, 10:26:34 AM

thanks.:god

Title: what goes here on the engine
Post by: Jit on April 01, 2007, 11:34:06 AM

if theres no stud in there, could it be that its not an FD front plate?

Mazda Rotary Club

Cars by Model Type => 3rd generation RX-7's => Topic started by: ttpower on March 31, 2007, 08:58:44 PM