Print Page - Here ya go Nabes

Title: Here ya go Nabes
Post by: interloper393 on March 30, 2007, 06:24:09 PM

Few pics for ya m8, still needs a fair bit of work but you get the idear lol.. hope ya like..

Title: may be of interest to you
Post by: Eddie on March 30, 2007, 10:02:53 PM

Hi again
Heres a pod I did a while ago, may give you some idea\'s
http://homepage.ntlworld.com/l.edmondson2/pics/index.htm

Its needs a little work but not much just hiding the screw which holds it into place thats about it.

Cheers

Title: Here ya go Nabes
Post by: interloper393 on March 30, 2007, 10:18:04 PM

Ooo nice i fancyed somethin like this for mine.. still planing idears lol.. guna build a parcel shelf speaker build in the next few days lol

Title: plenty idea\'s
Post by: Eddie on March 30, 2007, 10:37:54 PM

But never enough time to do them all.
Yours reminds me of a subaru bonnet vent a little.
I was concerned about obstructing my view which is why I have them up close and low also follows the lines of the other FD panels,
Just starting my PC install soon, got a 12 inch tft fitted into another instrument cowel which sits on the drivers side, going to fit a steering wheel for my little one to play driving games:)

Heres a pic

Title: Here ya go Nabes
Post by: interloper393 on March 30, 2007, 10:42:04 PM

its not for mine its for nabes on here bud, i made a corner gauge holder but gasejo has it now, need to make me another lol

Title: nice pod
Post by: Eddie on March 30, 2007, 10:46:08 PM

Only trouble with me is I take too long to do things for myself never mind for others, gt any pics of the other you did?

Cheers and thanks for the deal on the lambo door things

Title: Here ya go Nabes
Post by: interloper393 on March 30, 2007, 10:52:06 PM

http://www.mazdarotaryclub.com/forums/showthread.php?t=36207

After the last pic iv cut it flush with the gauge hole so sits alot nicer :)

Title: nice work
Post by: Eddie on March 30, 2007, 11:12:20 PM

Defo a dab hand on tha fibre glass stuff mate, its amazing what can be created. And I agree with your comments on being able to spray defo helps and int G3 great:) use it myself.
GOt a big one on the go at the mo, making a set of re head light type things, just made one of the pods the lights will sit in (found some great stuff for making strange shapes, clay which goes of at room temp, can be minipulated for ages then leave to set.

But I usually use a combination of chicken wire and cling film works a treat, the wire is flexible and can almost make any shpe out of it. then cling film it then fibreglass it then seperate it, do you use gel coat or bog to finish? before you spray
You thought about getting any molds made up for mass production?

Title: Here ya go Nabes
Post by: interloper393 on March 30, 2007, 11:16:23 PM

dunno how to make moulds bud lol.. just primer them with a really thick coat, sand down n paint, few coats of laquar n im done.. yeah its great playing around lol.. chicken wire rocks, will try the clingfilm thing tomoz :),.. any pics of your light?

Title: Here ya go Nabes
Post by: n4bes on April 01, 2007, 12:03:45 AM

Spot On Matey...........................

I Like it.....................

Title: Here ya go Nabes
Post by: interloper393 on April 01, 2007, 12:15:43 AM

i`ll try finishing it tomoz then cn be painted :)

Title: Here ya go Nabes
Post by: khyber pass on April 01, 2007, 10:21:07 AM

You fellas are doing some class stuff...tempted to tell my kids it would make a good project for Art College - :)

Would definitely like the light kit!

Title: Here ya go Nabes
Post by: interloper393 on April 01, 2007, 11:30:31 AM

heres the finished corner holder i made for gasejo :)

Mazda Rotary Club

Cars by Model Type => 3rd generation RX-7's => Topic started by: interloper393 on March 30, 2007, 06:24:09 PM