Just got round to removing the rats nest and blanking everything , i\'ve got 2 pipes going to the oil injectors, vac pipes I persume, can I plum these to the inlet manifold or do they have to be conected to the air filter, im sure these were fitted to the elbow that was on the primary turbo???
Might help ?
(http://robrobinette.com/images/hoses.gif)
Do you mean the purple one in this picture.
mine are just vented out towards the back of the engine
Thats them! you could\'nt post a pic up could you?
Cheers
its the blue vac pipe which leads to a t piece.
is\'nt your\'s connected to anything then?
no. thier is just another blue pipe on the end of the T piece and it vents out towards the back.
What single tub are you going to be running?:Thumbsup!
Garrett TO4S, hoping for 400fly power. You had a gud result from your\'s beside\'s the turbo problem!. i\'ll check into this vac pipe problem im sure it need\'s to be fitted into the air filter
470 fwhp 367lbft torque, I was well impressed.
You should get 400hp if you have the injectors ant i/c to support it.
whos mapping it?
Thats some good numbers you have there!! If you don\'t mind me asking what boost where you running?
1.2 bar.
I am getting wi next and I might crank the boost up to 1.4. it wud be good to see 500hp out if it.