With most other turbo\'d cars you can usually up the boost once you have a decent exhaust and induction kit. Fair enough you would prob need to fit a FCD also.
Is this the same story with the rx7? Can you up the boost once exhaust/filter? Or does it need Apexi PFC and remapped due to the engine being a sensitive beasty?
I think the safe limit is 12psi. Could be wrong though??
12psi seems a little low does it not? Considering 10psi is stock?
I think the standard is 0.9 psi without water injection.
But I wouldnt recommend it without getting a power fc and mapping the car properly !!
Yeah.. gonna get a Power FC next me thinks.
do a search there was the exact same thread passed a few weeks ago, about 1 bar is the max the twins can produce without the major problems as long as there in good condition.
matt
Hi
I read somewhere here to that 1bar boost is the max your turbos will take savely, higher then that and you will pooo the turbos
look for treads from warthog he had I belive really high boost on stock twins ...
Regards,
Michaelb
Over a bar they start to make more heat than power - and **** themselves sooner rather than later :-/