Print Page - No brakes!

Title: No brakes!
Post by: rxangus on January 05, 2004, 12:47:57 PM

Hi,

I have a 1996 FD and when I first start the car and move off, the brake pedal is rock solid and gives virtually no braking. It needs a good push with the foot before I get the correct resistance and normal braking.

Any ideas what this might be?

Thanks

Angus

Title: No brakes!
Post by: maximtaylor on January 05, 2004, 02:30:19 PM

If you find out, let me know - mine\'s doing this as well!!

I suspect air in the system at this stage.

Regards

Max

Title: No brakes!
Post by: Tomson on January 05, 2004, 02:51:38 PM

Mine also, worse when it is colder outside....Anyone ???

Title: No brakes!
Post by: Davegtt on January 05, 2004, 03:21:31 PM

Sounds like it could be the master cylinder seizing?

turn off the engine when the brakes are working and apply pressure to the predal, if it keeps slowly going down it is likely to be the master cylinder.

Dave :)

Title: No brakes!
Post by: Tomson on January 05, 2004, 03:31:21 PM

I must say that it has always done it and the brkes are fecking amazing - I thought it was a feature of the car ???

Mine is also a 1996..

Does this happen to anyone else.

Title: No brakes!
Post by: maximtaylor on January 05, 2004, 04:53:00 PM

Mine does not go to the floor with the engine off, the pedal stays hard all the time.

You really have to put full body weight on the pedal to get any braking at all.

Obviously I am not driving it at the moment!

Regards

Max

Title: No brakes!
Post by: Davegtt on January 05, 2004, 04:54:38 PM

Its not down to something like Jap brake fluid is it?

Mazda Rotary Club

General => General Technical => Wheels & Tyres, Suspension & Brakes => Topic started by: rxangus on January 05, 2004, 12:47:57 PM