Print Page - HELP needed tensioner pulley

Title: HELP needed tensioner pulley
Post by: brundish24 on March 07, 2007, 06:51:28 PM

hi needing a locknut or nuts for the power steering tensioner pulley as mine went missing as i dont know what it looks like im not sure if its one nut or you need two cos i need something thats sits in the pulley which will make it centre up on the bolt and the nut to fix it "tight" on the bolt

Title: HELP needed tensioner pulley
Post by: Jit on March 07, 2007, 06:55:15 PM

if you mean the idler pulley which bolts to the PAS bracket, then it consists of the pulley wheel, a bit which looks like a top hat which goes behind the pulley, and another bit which looks like a sombrebro which goes in front of the pulley wheel. THe nut which holds it uses a 17mm socket (for the thread size on the shaft, youd usually use a 14mm nut, but this one needs a 17mm one which has a broader shoulder)

Title: HELP needed tensioner pulley
Post by: brundish24 on March 07, 2007, 07:20:21 PM

here is a pic all i got left is the pulley nothing to fix it with eg nut

[ATTACH]28349[/ATTACH]

Title: HELP needed tensioner pulley
Post by: Jit on March 07, 2007, 07:55:07 PM

yeah, theres 3 parts you ll need apart from the nut to fix that pulley...

Title: HELP needed tensioner pulley
Post by: brundish24 on March 07, 2007, 09:30:20 PM

can i get these from mazda?

Title: HELP needed tensioner pulley
Post by: brundish24 on March 08, 2007, 10:59:11 AM

bump bump...

Mazda Rotary Club

General => General Technical => Anything Engine/Performance/Tuning related => Topic started by: brundish24 on March 07, 2007, 06:51:28 PM