Print Page - V Mounts

Title: V Mounts
Post by: jetpilot on February 15, 2007, 12:55:37 PM

Hi guys, another question regarding v mounts. If your running a large intercooler, where have you located AST\'s and perhaps where have you have fitted air filter. Photo\'s appreciated!

Title: V Mounts
Post by: Fish on February 15, 2007, 01:04:30 PM

Located mine just below the filler neck, and in between the I/C and the pulleys.

Fish

Title: V Mounts
Post by: Fish on February 15, 2007, 01:06:14 PM

Here\'s a picture.

Fish

Title: V Mounts
Post by: jetpilot on February 15, 2007, 01:13:15 PM

Thanks buddy, any more guys, just looking for ideas! I take it the AST doesnt have to be at a particular height, i mean it could be lower or higher than the filler neck?

Title: V Mounts
Post by: nikp on February 15, 2007, 02:24:23 PM

Removed AST altogether. Couldn\'t be bothered with it.

Title: V Mounts
Post by: LRP on February 15, 2007, 04:15:14 PM

moved the relays and bolted mine on the suspension turet! but converitng to single so may not fit there ?
(http://i25.photobucket.com/albums/c58/leightonrx7/40a3802b.jpg)

Title: V Mounts
Post by: jetpilot on February 15, 2007, 04:32:37 PM

I have decided to loose mine as it seems a popular mod to do.

Title: V Mounts
Post by: Carl on February 15, 2007, 05:17:14 PM

Quote from: LRPmoved the relays and bolted mine on the suspension turet! but converitng to single so may not fit there ?
(http://i25.photobucket.com/albums/c58/leightonrx7/40a3802b.jpg)

That ast is too high.
It should be below the filler.
VERY pretty engine bay though!
Regards
Carl

Title: V Mounts
Post by: Jono FD3 on February 15, 2007, 05:30:27 PM

I second the engine bay.... I\'m goign to save the pic & use it as something to enspire too!!!

Jono

Title: V Mounts
Post by: LRP on February 15, 2007, 10:48:18 PM

Quote from: Jono FD3I second the engine bay.... I\'m goign to save the pic & use it as something to enspire too!!!

Jono

cheers it takes alot of tlc!! yes i thought it was too high got to find it a new home now as there\'s a single tub in the way

Title: V Mounts
Post by: LRP on February 16, 2007, 06:44:36 PM

Quote from: nikpRemoved AST altogether. Couldn\'t be bothered with it.

looks like im going with you nik cant find anywere to fit it ! i presume nik that you blank of the header tank feed and joined the small hose thats comes from bottom of rad to the lower water housing

Title: V Mounts
Post by: jetpilot on February 16, 2007, 06:48:37 PM

Theres a sticky in the techinal section with links as to how to do this! Seems there are 2 ways, both involve getting a filler neck from an FC for the overflow and then either, connect the hose from the bottom of the rad to one from the lower part under the filler, or just simple plug up both the mention hoses!

Title: V Mounts
Post by: nikp on February 16, 2007, 09:06:26 PM

I used the filler neck from an FC as described, then connected up the rad pipe to the lower part of the filler neck as this way looks neater in my opinion.

Mazda Rotary Club

General => General Technical => Anything Engine/Performance/Tuning related => Topic started by: jetpilot on February 15, 2007, 12:55:37 PM