Text only | Text with Images

Mazda Rotary Club

Cars by Model Type => Cosmo's and Other Rotary Powered Vehicles => Cosmo's => Topic started by: kev-yorks on January 24, 2007, 11:23:38 PM

Title: Cosmo brakes part numbers
Post by: kev-yorks on January 24, 2007, 11:23:38 PM
Below is a list of brake pad manufacturers and there part numbers that make pads for the JC Cosmo if anyone knows of any others then let me know and i\'ll add it to the list.
 
Front pads
 
Fuji brake ltd........................AFP351
Akebono..............................AN343K
Kashiyama...........................D3082
NBK....................................PF5300
Sumitomo............................SN272
Tokiko................................TN498
Mitsubishi............................MN300
Aishin.................................ASZ006
Black diamond......................PP409
 
 
Rear Pads
 
Fuji brake ltd........................AFP272S
Akebono..............................AN344WK
Kashiyama...........................D3079M
NBK....................................PF5290
Sumitomo............................SN657P
Tokiko................................TN425M
Mitsubishi............................MN170M
Aishin.................................ASZ003M
Black diamond......................PP269
Title: Cosmo brakes part numbers
Post by: Carl on January 25, 2007, 08:25:10 AM
This should be a sticky thread me thinks.
Regards
Carl
Title: Cosmo brakes part numbers
Post by: Ultraman_Cosmo on February 10, 2007, 06:33:38 PM
thanks for that Kev, very handy.
Title: Cosmo brakes part numbers
Post by: Iwan on April 04, 2007, 09:56:41 AM
Few option available,

the front brakes are the same as on Familia 323 GT-R aka BG8
 
Very strange in my opinion, the BG8 is something like 900kg in weight, but the Cosmo is a big 1650kg car sharing the same brakes. Mazda is known to build very well thought out cars, but the brakes on a Cosmo is what I can\'t understand.

just my 2p

REgards
Iwan
Title: Brake Pads - new part numbers
Post by: jimscosmo on April 13, 2007, 07:05:11 PM
I dont think you have these
 
APEC - Pad No:- PAD 1067 for the rear and PAD 939 for the front. These are available from any good motor factors cos the rears are from 929/Xedos 9 etc. I got em from PRO PARTS in Waterlooville, Hants. Very friendly and helpful.:driving
Title: And what about brake upgrade?
Post by: Funklove on September 21, 2007, 08:01:23 AM
I found that front disk rotors and caliper mounts are the same with Mazda BG-8 4WD hi power. I found that D2Racing (it is AP racing copy) makes 8pot 330-356mm fronk kit for this car. I bought one and awaiting shipment next month. I\'ll try to install it on my JC. It is cheap.
Title: Cosmo brakes part numbers
Post by: kev-yorks on September 21, 2007, 07:47:13 PM
I\'m looking at going the rx8 disc fd caliper route over the winter for the fronts rears are looking like a problem at the moment though.
Kevin
Title: Cosmo brakes part numbers
Post by: daverey on May 20, 2008, 02:32:49 PM
Thought these may be of use to someone.
 http://cgi.ebay.co.uk/Mazda-GLC-Front-Brake-Pads-GLC-Wagon-Cosmo_W0QQitemZ360044272443QQihZ023QQcategoryZ52640QQtcZphotoQQcmdZViewItemQQ_trksidZp1742.m153.l1262
Title: Cosmo brakes part numbers
Post by: Funklove on May 26, 2008, 07:58:04 PM
Good news! JC\'s D2 8 pot front and 6 pot rear with 330-356 rotors available in stock! Also they have racing suspension.
Text only | Text with Images