Text only | Text with Images

Mazda Rotary Club

General => General Technical => Anything Engine/Performance/Tuning related => Topic started by: Eddie on January 04, 2007, 10:40:46 PM

Title: aftermarket FPR and OEM rail
Post by: Eddie on January 04, 2007, 10:40:46 PM
Hi all

I was wondering if anyone knows which vendor may supply these adapters for fitting an aftermarket FPR to fit on a standard rail using standard rubber hose
Rotary extreme did them heres a pic.

Dont fancy tapping the rail.

Also whilst I am asking I was going ot move my fuel filter to intot the bay for easy access anyone done this, seena  couple of thread on rx7club.

Cheers once again.
Title: aftermarket FPR and OEM rail
Post by: Iwan on January 05, 2007, 10:56:33 AM
Hi,
this is SARD FPR adapter for FD3S. Ring Clive and him should be able to sort aut this one for you. You should go fo 90° 1/8 NPT adapter, not for the traight one as shown on the picture.

REgards
Iwan
Title: aftermarket FPR and OEM rail
Post by: strange_days_uk on January 05, 2007, 11:27:04 AM
rhdjapan

scroll down through this section (https://www.rhdjapan.com/product.php?int_categoryid=2072)
Title: aftermarket FPR and OEM rail
Post by: DRAGON on January 05, 2007, 11:32:03 AM
We stock them £15.00, with the right angle so you can position it towards the FPR. But have a minimum order of £25.
Title: update
Post by: Eddie on January 05, 2007, 12:48:50 PM
Thanks for replying guys.

Cheers
Title: Other parts
Post by: Eddie on January 08, 2007, 05:18:04 PM
Hi Ross

I am sure I can find another 10 quid to spend on parts:)

I need a wastegate control solenoid valve and a double throttle control valve, also two nipple things which will screw into my FPR just realised I have nothing for the fuel pipe to attach to, I will get the size of thread needed, but would imagine it quite a standard size.


Cheers
Title: aftermarket FPR and OEM rail
Post by: richard cash on January 08, 2007, 08:46:30 PM
eddie, a bit off topic but are you still trying to find a greedy elbow with aditional injector holders etc. I noticed on another post you was going to swap your standard one + £15 for one that had them already welded in. Just asking as i may have one available.
Title: aftermarket FPR and OEM rail
Post by: allstaruk on January 08, 2007, 08:47:46 PM
Thats a nice looking bit of kit do you do one like that but to take aeroquip connectors?

A
Title: elbow
Post by: Eddie on January 08, 2007, 10:19:26 PM
Hi Richard

Richard yes I am still after one mate let me know if you get hold of one.
You can mail Leee_home@hotmail.com

allstaruk I do believe the sard one in the pic are threaded so differnt connectors can be attached to the plate, not sure about the one Dragon sell.


Thanks
Title: aftermarket FPR and OEM rail
Post by: allstaruk on January 08, 2007, 11:51:56 PM
the one in the pic is for clamp on hose but after searching you can get the same item threaded to take aeroquip screw on connectors except I can\'t find anyone who stocks them.

A
Title: It is for clamp on hose
Post by: Eddie on January 09, 2007, 12:11:12 AM
I thought that clamp hose just screwed in mate have a look at this one
https://www.rhdjapan.com/shop/cart.php?m=product_detail&p=698

Thgouth they are the same and so you could fit any fitment into them.

But knowing me with my limited knowledge I will be well wrong:(


Cheers
Title: aftermarket FPR and OEM rail
Post by: DRAGON on January 09, 2007, 10:29:44 AM
Hi Eddie, give us a call, and I can talk you through what you need.
Title: aftermarket FPR and OEM rail
Post by: richard cash on January 09, 2007, 12:54:19 PM
eddie, i have sent you an email to your hotmail account
Text only | Text with Images