Mazda Rotary Club

General => General Technical => Topic started by: interloper393 on December 31, 2006, 11:34:03 AM

Poll
Question: project section for car builds?
Option 1: eah that a be ROCKING! :P votes: 39
Option 2: ope poop idear, go and stand in the corner!! votes: 0
Option 3: m i bovered... votes: 1
Title: Votes of a project section :)
Post by: interloper393 on December 31, 2006, 11:34:03 AM
Think it be kewl to have a project section for any car builds ect..
what cha all think?
 
:King
 
As per the majority of replys a projects section is now set up in the members section.
http://www.mazdarotaryclub.com/forums/forumdisplay.php?f=130 (http://www.mazdarotaryclub.com/forums/forumdisplay.php?f=130)
Title: Votes of a project section :)
Post by: antnicuk on December 31, 2006, 11:38:05 AM
voted yes,   projects are the best bit
Title: Votes of a project section :)
Post by: kev-yorks on December 31, 2006, 11:40:59 AM
Yes if its in the member section and rotary based.
Kevin
Title: Votes of a project section :)
Post by: 88GT-R on December 31, 2006, 11:45:34 AM
I agree, would be great but must be rotary based. I wait with baited breath for a debate!

John
Title: Votes of a project section :)
Post by: interloper393 on December 31, 2006, 12:07:58 PM
Quote from: kev-yorksYes if its in the member section and rotary based.
Kevin

i cn see this going off topic soon :rollin  lol!

agree onit being the best bits, spent ages going through the driftworks and skyline ones, some real dedication and effort gone into them.. would love to see the same going into the rex in there own well earned section :InLove
Title: Votes of a project section :)
Post by: antnicuk on December 31, 2006, 12:16:02 PM
Just keeping things on topic
Title: Votes of a project section :)
Post by: shaunwil on December 31, 2006, 12:25:55 PM
Voted yes and there it goes off topic ^^^^^^

Shaun
Title: Votes of a project section :)
Post by: interloper393 on December 31, 2006, 12:33:46 PM
Quote from: shaunwilVoted yes and there it goes off topic ^^^^^^

Shaun

yup in only 4 posts lol
Title: Votes of a project section :)
Post by: OLSKOOLROTAR on December 31, 2006, 01:55:20 PM
voted yes. as long as its rotary based:cool

Jase
Title: Votes of a project section :)
Post by: johnf on December 31, 2006, 02:04:32 PM
I have no objections but it occurs to me that with only a few \'old schoool\' cars around +1st, 2nd and 3rd gen cars and only one type of rotary engine how many possibilities can there be?

John
Title: Votes of a project section :)
Post by: kev-yorks on December 31, 2006, 02:33:40 PM
By rotary based John i meant on a rotary powered vehicle doesn\'t need to be a engine mod, suspension upgrades etc lots of possibilities.
 The reason for in the members section not all people declare all mods to the insurance companies, put it in the open part and anyone can see what you\'ve been up to. At least in the members section there\'s a chance insurance companies would miss it in the case of a claim. We don\'t want another Blitzboy episode.
Kevin
Title: Votes of a project section :)
Post by: TwistedHumour on December 31, 2006, 03:08:42 PM
I voted yes.

It\'s nice to be able to follow a project all on one thread.  I also think it should be in the members section and only the person who started the thread should be able to post in it.

If people want to comment on the project, a separate thread could be opened for people to talk about it.

Just my two cents :)
Title: Votes of a project section :)
Post by: elford_tim on December 31, 2006, 03:31:29 PM
Yep, I think that would be great although I\'m with Kev on this - would be great if it was in the member\'s section.

OTOH we\'ll probably lose out on a lot of people who still refuse to be assimilated, err, join :D.
Title: Votes of a project section :)
Post by: interloper393 on December 31, 2006, 03:53:28 PM
i think alot of good threads will be lost by puting into members only?
If im being honest.. i didnt join because of the benifts from being a member, as i feel i`ll never use any of them apart from cheaper entry to events :P i joined on the pure fact that i dont wanna see this club fail as it`s by far the best iv been to.. im sure many will feel the same? half the fun from owning a rotary is this club :yes im babling again sorry lol..

Happy new year lol
Title: Votes of a project section :)
Post by: kev-yorks on December 31, 2006, 04:10:16 PM
Quote from: interloper393i think alot of good threads will be lost by puting into members only?
If im being honest.. i didnt join because of the benifts from being a member, as i feel i`ll never use any of them apart from cheaper entry to events :P i joined on the pure fact that i dont wanna see this club fail as it`s by far the best iv been to.. im sure many will feel the same? half the fun from owning a rotary is this club :yes im babling again sorry lol..
 
Happy new year lol

Is every single mod on your car notified to the insurance? If its in the open section the insurance companies do read them ask Mark Blitz Boy. Do something post it in the projects section without telling them and its bye bye insurance should the worst happen. Even silly cosmetic changes should be notified! I don\'t have a problem posting out in the open there\'s three pages of mods listed on my car and i\'m going to ask them to inspect it this time around after the latest batch. But how many more out there are so open. Hence why it should be in the members section.
Kevin
Title: Votes of a project section :)
Post by: shaunwil on December 31, 2006, 04:35:54 PM
Can\'t wait to see the face of the inspector. :D

Shaun
Title: Votes of a project section :)
Post by: interloper393 on December 31, 2006, 04:39:58 PM
when did insurers start checking forums?

Im not bothered where it goes as long as we cn have one :D im a member anywho :yes
Title: Votes of a project section :)
Post by: dandan on December 31, 2006, 05:13:42 PM
My insurance claim got denied cos they checked out the forum and found a load of un-announced mods, won\'t be making that mistake again! oops. Gotta learn i suppose.
I voted yes to this, putting in the members section may be a good idea but some sort of teaser for non members could be handy, like one thread made public every month (with the authors permission of course)
:)
Title: Votes of a project section :)
Post by: AtomicRex on December 31, 2006, 05:39:48 PM
This idea gets my vote!

Thankfully my car is insured with Competition Car Insurance....I think the mods come with the nature of the insurance....so Im happy to chat about mine.  In fact all they care about is the size of the engine...so 1.3 turbo it is ;)
Title: Votes of a project section :)
Post by: probedb on December 31, 2006, 06:25:32 PM
Definitely a good idea! I declare everything anyways.
Title: Votes of a project section :)
Post by: Red and Single on December 31, 2006, 10:16:38 PM
Voted yes....members only please
Title: Votes of a project section :)
Post by: McCARTHY on January 01, 2007, 12:17:22 PM
i agree voted yes and members only.
Title: Votes of a project section :)
Post by: ro284 on January 01, 2007, 02:19:26 PM
Also Voted Yes, Members Only
Title: Votes of a project section :)
Post by: tinker-27 on January 01, 2007, 07:02:22 PM
i vote yes !!
Title: Votes of a project section :)
Post by: Crazy Eddie on January 01, 2007, 11:14:04 PM
I voted yes. Love looking at projects going on. (Including big V8\'s going in the Gen 3 :Giggle )
Title: Votes of a project section :)
Post by: oldone on January 02, 2007, 07:35:41 PM
Project threads are cool.......:D :cool :Typing ,....Ill vote YES as long as its in the MEMBERS SECTION,ROTARY BASED i.e.ROTARY motor going into something or ROTARY car complete project i.e. MAZDA body and ROTARY engine........:Typing   NO PISTON MOTORS INTO MAZDA\'S !!!!!!!:2eek ;)
Title: Votes of a project section :)
Post by: stuart wizy on January 02, 2007, 09:26:33 PM
good idea
get it sorted and I will post all pics of my project defo:Thumbsup!
members only and rotary only
Title: Votes of a project section :)
Post by: kev-yorks on January 02, 2007, 10:59:25 PM
Right Guys project sections set up for you big thank you to Mike LMR. In the members section as requested by the vast majority for all your rotary power vehicle projects and modifications. Don\'t feel it needs to be a big project, even if its just a little modification get it posted and make this section work. Might be worth saying how you rate the mods you do also so others know if its worth doing.
If anyone has a project thread ongoing anyware and would like it transfering to this section please let one of the mods know by PM and we can transfer it across for you.
 
Kevin
Title: Votes of a project section :)
Post by: TRex on January 02, 2007, 11:43:23 PM
Just don\'t try to make a joke... as thats apparently frowned upon....... :(