Print Page - Aeroquip Hoses and Braided Lines

Title: Aeroquip Hoses and Braided Lines
Post by: allstaruk on December 23, 2006, 11:18:09 AM

Right I am in the process of sroting out my fueling so I can eventaully go single.

At the moment I am just planning on maxing out the twins but everything is being done in mind of going single and for HUGE power so I have decided to start tackling the fuel setup.

So my questions are, I have a FPR that I need to fit and it takes proper screw on (aeroquip connectors I belive) so I\'m going to try and keep that theme through the bay, so my main question is how do I and where do I get connectors that fit onto the primary fuel rail, like so.

(http://img85.imageshack.us/img85/2848/post101061780880ox9.jpg)

Cheers

Alan

Title: Aeroquip Hoses and Braided Lines
Post by: rx7veilside on December 23, 2006, 11:21:43 AM

merlin motorsport at castle coombe shd be able to sort u out

Title: Aeroquip Hoses and Braided Lines
Post by: strange_days_uk on December 23, 2006, 11:23:10 AM

sell them here matey (https://www.rhdjapan.com/product.php?int_categoryid=2072) my need to scroll down a little

Title: Aeroquip Hoses and Braided Lines
Post by: probedb on December 23, 2006, 11:26:00 AM

Also summit racing in the US are very good and much cheaper than over here! Since you\'re redoing the fuelling maybe think about giving each rail it\'s own feed? Most Aeromotive AFPRs have two inputs so you can take one from each rail and you split the feed to the rails beforehand? There was a post somewhere on rx7club by a guy who\'d done this.

Title: Aeroquip Hoses and Braided Lines
Post by: allstaruk on December 23, 2006, 11:54:22 AM

Ok lads steady on I\'m new to this whole fueling thing,

1st what connector do I need to use to connect to the primary rail, will I need to tap the rail.

2nd How do you mean about splitting the fuelin for each rail,

I\'m going to need explanattions on all this

Al

Title: Aeroquip Hoses and Braided Lines
Post by: strange_days_uk on December 23, 2006, 12:01:06 PM

Dude, see this thread http://www.mazdarotaryclub.com/forums/showthread.php?t=29373

I bought this off Ross and it bolted straight onto the stock setup.

I don\'t know too much about it either..

Title: Aeroquip Hoses and Braided Lines
Post by: allstaruk on December 23, 2006, 12:44:00 PM

Thats pretty much what I was talking about I have the FPR I just need the braided hoses and the fittings.

A

Title: Aeroquip Hoses and Braided Lines
Post by: strange_days_uk on December 23, 2006, 12:48:14 PM

Cool - well I guess it makes sense to get everything from one place so my link is pretty much defunct :(

Title: Aeroquip Hoses and Braided Lines
Post by: allstaruk on December 23, 2006, 01:21:17 PM

Nope its helped, now just need someone to tell me how to go about doing it myself

Mazda Rotary Club

General => General Technical => Topic started by: allstaruk on December 23, 2006, 11:18:09 AM