Mazda Rotary Club

General => General Technical => Topic started by: tezz12345 on December 10, 2006, 12:19:34 PM

Title: spark plugs
Post by: tezz12345 on December 10, 2006, 12:19:34 PM
dont wanna sound like to much of a retard but is there a easy way to get the spark plugs out??????
Title: spark plugs
Post by: strange_days_uk on December 10, 2006, 12:33:07 PM
get your arm in there with a socket, I crawled underneath the car to get the lower ones out, but you can get the top ones out looking down ..
Title: spark plugs
Post by: Rx-7 turbz on December 10, 2006, 01:25:22 PM
its not that hard take the plenium off, jack the car up so your not bent over all the time. Get a small handled ratchet, a wobley socket head, a few different length extensions. It took me about an hour to do the first time i did it, all this can be done from the top of the engine rather than going underneath
Title: spark plugs
Post by: RemarkLima on December 10, 2006, 05:36:48 PM
From the top I thought was just a massive headache. I found it much easier and quicker to jack the car right up high and take the passenger wheel off.

Then it\'s much easier from underneath IMHO. Also make sure you have a 14mm spark plug socket (rather than the standard 12mm)... But I tried it from above but it just looked like to much trouble.
Title: spark plugs
Post by: TonyC on December 10, 2006, 09:26:10 PM
Looks a lot harder than it is. I changed mine for the first time ever yesterday - took about 25 minutes doing it from the top - if that. You just have to feel around as there is no way you can actually see what you are doing.
Title: spark plugs
Post by: Martiny on December 11, 2006, 08:54:36 AM
You can remove the black plastic intake elbow, gives more room for top access.