Mazda Rotary Club

Cars by Model Type => 3rd generation RX-7's => Topic started by: Grizzly on November 29, 2006, 05:23:26 PM

Title: vac leak.
Post by: Grizzly on November 29, 2006, 05:23:26 PM
Can some one help,

I have been having a few things go wrong over the last few days but the New one is i seem to have had a Breather Pipe come off?

Basicly i have developed an Air leak (the idles gone up to 1200rpm) and looking over it today the Large Pipe that fastens to the front side of the Upper inlet has gone missing?? I know it sounds odd?

From memory it about 8mm and has a plastic valve in it (just can\'t remember where it goes but i think it is a Breather and comes off the Oil filler??).

can some one Take a pic of it? Also is the Plastic thing a One way valve? (I\'m guessing it is?) Or even better if some one has a Spare one that i could Buy?

BTW its an FD :)

Cheers.
Title: vac leak.
Post by: Jit on November 29, 2006, 05:31:13 PM
it is a breather which comes off the oil filler neck and has a PCV valve in the middle
Title: vac leak.
Post by: Grizzly on November 29, 2006, 05:35:22 PM
Yeh i have just dug out the Vac Diagram, Its Defo the pipe that goes from the Inlet to the Oil filler (as you say with a PCV valve in it)

Next job, Getting hold of one.