Mazda Rotary Club

Cars by Model Type => 2nd generation RX-7's => Topic started by: R32 Nik on November 06, 2006, 07:24:45 PM

Title: I love FC\'s :D
Post by: R32 Nik on November 06, 2006, 07:24:45 PM
I really love Fc\'s,

Sarahs TII decided to dump its guts all over the road the other morning on her way to work.:(  ( not the reason I love FC\'s lol)

She was just driving calmly through a 30 limit and the oil light came on and a buzzer went off so she pulled over straight away.:Thumbsup!

It got transported home by the very nice AA man.

 I got it on the jack yesterday and found out what the problem was. It was the oil feed pipe from the block to the top of the oil cooler which had split inside the joint from hard pipe to soft pipe. When the engine was running and the oil was under pressure it was p***ing out of this joint.

So I (with the help of Sarah) inspected the EGI and found that it had the exact same pipe :wiggle :Party

So I (with the help of Sarah) took that pipe off and replaced it with the one from the EGI and all is now good :yes :3gears-rh

In the space of roughly 2 hours it was investigated, diagnosed and fixed. All thanks to the ample room under the bonnet on these cars.

I must add that I am by no means a mechanic but I love tinkering with and fixing the cars. I just found it quite easy to work on and was very happy to do it.

Sorry for boring you all but I just thought I would let you know what had happened :D

Nik
Title: I love FC\'s :D
Post by: grinder on November 06, 2006, 07:51:10 PM
gald to hear that no serious damage was done :D

Stu
Title: I love FC\'s :D
Post by: R32 Nik on November 06, 2006, 07:59:31 PM
Nop, all safe and sound and oil pressure is good.

No permanent damage thanks to Sarah\'s quick thinking.

I am sooo glad we didnt sell her EGI off as spares/scrap. Just think of the cost of a new pipe from Mazda lol
Title: I love FC\'s :D
Post by: grinder on November 06, 2006, 08:03:29 PM
yeah your not kidding - prob not much change from £60
Title: I love FC\'s :D
Post by: FD3SNuttah on November 06, 2006, 10:12:21 PM
mate that bolt going into the oil cooler is a PITA to get off - so i wanna say well done for that effort.

PAH a new pipe!! i got a spare oil cooler n pipe somewhere!! all you gotta do is ask buddy!!
Title: I love FC\'s :D
Post by: antnicuk on November 06, 2006, 10:56:31 PM
i fcuking hate the things,  spent 3 days doing a job that i have done 2 and a half hours before.....

will post up if i get bored at work!
Title: I love FC\'s :D
Post by: t2rew on November 07, 2006, 06:59:23 PM
i kin hate them too. even as it is now (sitting on axle stands in the garage) it still manages to rinse a few hundred quid from my bank account every month.

i even have to supply the local comunity with spare parts to keep theirs on the road. :confused:

wish id bought a trabant
Title: I love FC\'s :D
Post by: antnicuk on November 07, 2006, 07:09:31 PM
many thanks to Jay, who helped with a couple of minor bit for mine,  

oh, did he mention that already.....  it was only a gearbox!