Print Page - Idling Problem Fd3s Tt

Title: Idling Problem Fd3s Tt
Post by: Wim Wellinghoff on January 09, 2003, 07:44:40 PM

I fitted a complete decat Blitz free flow system (brilliant) however since, the car does not want to idle and the fuel consumption has increased to incredible levels. The exhaust did not take the standard fitted CO sensor, so had to de-activate. Any suggestions please?

Title: de activate?
Post by: t2rew on January 09, 2003, 11:19:49 PM

without the sensor how does the car know weather its got the fuel mixture right? probably a safe default to run rich.

Title: Re: Idling Problem Fd3s Tt
Post by: mmilner on January 10, 2003, 12:16:49 AM

QuoteOriginally posted by Wim Wellinghoff
I fitted a complete decat Blitz free flow system (brilliant) however since, the car does not want to idle and the fuel consumption has increased to incredible levels. The exhaust did not take the standard fitted CO sensor, so had to de-activate. Any suggestions please?

Hi sorry for the negative vibe, but:- It\'s not \'brilliant\' if it causes the sort of problems you\'re having. To quote from Glenn Butchers guide \'What to look for when purchasing an FD (3rd gen.) RX-7\':-

The turbo rotary can be an awesome but delicate engine. One of the main problems is that people start modifying them without knowing the knock-on effects. For example, changing the exhaust to a more free-flowing system without ensuring that the engine is running rich enough/and there is no boost spike/creep can very easily cause apex seal failure (which basically means an engine rebuild - expensive).

The fact that it didn\'t take the CO sensor should have rang alarm bells...Sorry.

Best wishes,
Martin.

Title: Re: Idling Problem Fd3s Tt
Post by: clive on January 23, 2003, 09:01:18 AM

Hi Wim

Sorry missed this one , from memory ( decated mine must be three years ago now ) you put the sensor to earth but if you are meaning the one in the down-pipe that would have to go back in.

All the best Clive

Title: Blitz Exhaust
Post by: johnf on January 23, 2003, 12:24:29 PM

I\'m quite new to all this and bought my RX cuz I loved the shape etc.

My car was bought with an existing Blitz system, I posted last week regarding fuel consumption, being under 13mpg and no I don\'t have a heavy right foot. What mpg are you geting Wim?

Would fitting a standard system make much difference to the mpg.

The cars a DREAM
Fuel a NIGHTMARE

Title: Re: Idling Problem Fd3s Tt
Post by: clive on February 09, 2003, 06:24:19 PM

QuoteOriginally posted by Wim Wellinghoff
I fitted a complete decat Blitz free flow system (brilliant) however since, the car does not want to idle and the fuel consumption has increased to incredible levels. The exhaust did not take the standard fitted CO sensor, so had to de-activate. Any suggestions please?

Hi Wim,

What was the out come of your problem , did you sort it?

All the Best Clive.

Mazda Rotary Club

General => General Technical => Topic started by: Wim Wellinghoff on January 09, 2003, 07:44:40 PM