(http://www.mazdarotaryclub.com/forums/attachment.php?attachmentid=24226&d=1160467479)
Several of us are waiting for a response from flyrx7 in the US, he\'s not producing these at present and isn\'t answering mails anymore :(
There is good demand here for these, a batch of 20 would sell soon enough.
Does anyone have the skill / contacts ??
Please ????
If there is origional 1 available then i can get my mate to make them...but we do need origional pod of what ever size needed...52mm 0r 60mm.
Cheers
Would making a mould of it cause any damage to the original at all ??
If not then I\'m sure we could get one sorted while poeple have their cars tucked away for winter.....
Kevin T ????
If it does cause damage could always give the person one of the new ones
Im sure it wont get damaged, may be the plastic coating/covering get damaged but that can be resprayed or repaired...:Thumbs-up
Right then, lets see if we can get a doner !!
Haven\'t got one to donate, but am definatly interested in buying one if they are a decent price.
i would be interested to
Me three! :)
me four if they are 60mm
i cud make them if i had a pod.. anyone got a normal gauge pod they cud lend me? also im making a 2 gauge holder to fit into the front vents.. o the joy hehe
i have one the 3x52mm version
as long as i see it back i could donate it to be copied
i want a 3x60mm one also tho
If it ever happens, count me in for a 3 x 52mm pod...
CJ
Would be interested in a set of 60mm.
Any update on this...?
I fancy 1 x 52mm Triple pod, and maybe also 1 x 60mm Triple pod for good measure :)
Jon :god
What make is the original pod?Does it fit in the centre speaker grill hole?
They\'re custom pds made by a guy who goes by the name of FlyRX7...
See this thread for some background info..
http://www.mazdarotaryclub.com/forums/showthread.php?t=34130&highlight=flyrx7 (http://www.mazdarotaryclub.com/forums/showthread.php?t=34130&highlight=flyrx7)
His site is here...
http://hometown.aol.com/flyrx7/Rx7-Gauge-Pod.html (http://hometown.aol.com/flyrx7/Rx7-Gauge-Pod.html)
count me in for a 3 x 52mm guage holder :)
I\'ve said it before but I\'ll say it again, I\'ll take a 3x60mm pod :D
I may have an alternative soon, or could make what you want.
Quote from: rotaryart.uk.comI may have an alternative soon, or could make what you want.
I\'ll also take a 3x60mm pod :) When whoever makes them makes them....
Put me down for a normal 60mm tripple Pod who ever is going to make em
Quote from: rotaryart.uk.comI may have an alternative soon, or could make what you want.
MAKE WHAT WE WANT GARY !!!
The first person to successfully copy these (tripple 60mm I reckon will be the most popular) will sell a LOAD of them !!
Quote from: Red and SingleMAKE WHAT WE WANT GARY !!!
The first person to successfully copy these (tripple 60mm I reckon will be the most popular) will sell a LOAD of them !!
Here here :) or is that Hear hear ;)
It\'ll be expensive cos I\'ll have to get an oil temp gauge to fill the extra hole but them there A-pillar ones are a bit in yer face and block the view somewhat.
I\'ve got one with 2 x 52mm and 1 60mm original flyrx7 pod:wave
I\'m wanting either 3 x 52 or 3 x 60!
Put me down for a 3 x 52.
Martin H
I would like a 3 x 60mm pod, definatly think the person who could make these would make a pretty penny
Quote from: RedRummyAny update on this...?
I fancy 1 x 52mm Triple pod, and maybe also 1 x 60mm Triple pod for good measure :)
Jon :god
I meant one triple 52mm and one triple 60mm pod :)
cash waiting :)
Just got back from my guys, and meeting them again tomorrow.
My pods will be ready shortly approx 10 days, there looks likely to be a 3 and a 4 pod holder. They will be made for 52 but for romm to be dremelled out to 60mm so best of all worlds, mix and match openings till ya hearts content.
What sort of price are we looking at Gary?
Should know tomorrow, after meeting with my guys.
result!
now don\'t go making them too expensive now! ;)
Quote from: rotaryart.uk.comShould know tomorrow, after meeting with my guys.
Excellent....what sort of guarantee would you do, say if I dremelled out to 60mm only to find my gauges were too deep? Would I be able to return it?
sorted :) the 4 guage one would be ideal :D
whoops - ignore this post!
Gary, there are pods available for a 52mm gauge already, it\'s the 60mm version for the defi\'s that everyone wants mate.
We\'d like to be able to buy one ready sorted to take the defi\'s, I dont have good dremel skills.
Quote from: Red and SingleGary, there are pods available for a 52mm gauge already, it\'s the 60mm version for the defi\'s that everyone wants mate.
We\'d like to be able to buy one ready sorted to take the defi\'s, I dont have good dremel skills.
This is my view as well, only need 60mm version, as i have the Defi Guages ready to go in. I would buy a 3 x 60mm
Same here
i allready have a FlyRX7 3x52mm pod but i want 60mm to fit my defi\'s into
where are the 52mm ones available from then?? thats what i need!
Yep, me for the 60mm too for the Defis again....
i could use 4x52mm
I want a triple 52mm pod...
Any about yet?
How much?
Right, uplaoding now is a update to my pod section.
I am now making the rotorpods in 2, 3 and 4 guages, the 3 and 4 gauge will be ready in approx 7-10 days as moulds are being made.
I will only make them in 52mm with room for them to be made in to 60mm as it is too costly to make 4 moulds 52 & 60mm. Dremelling out is childs play and does not have to be the neatest job as your gauge edge will cover the dremelling out. It will also give you guys the choice as to what size gauge you use and some of you can mix sizes without problem ie 1x52mm and 2x 60mm etc.
Piccys will follow as and when 1st one is out of the mould.
http://www.rotaryart.uk.com/acatalog/Rotaryart_products.html
argh Rotor shaped ones :(
look hideous IMHO. Dont suit the contours of the dash at all :(
If everyone want the round ones, I will need a model, and will get them made as well, who wants what shape.
I will start a new thread and a poll on the shapes.
i have said before i currently have a 3x52mm pod that i am willing to donate to create a mould from i know Sicknote has a 3x60mm one but doubt he would want to give it up to be copied i dont know.
I will wait and see what the rotor ones look like when installed and make my mind up then i think.
I have had these defi gauges sat in my garage now for over a year and still cant fit them to my car so if this is all i can get this is what i will have to plump for.
Poll here
http://www.mazdarotaryclub.com/forums/showthread.php?t=35833
Quote from: CraigNargh Rotor shaped ones :(
Oh good god.....I thought we finally had an answer to our problems.
Gary, we want ROUND ones becuase they look OEM.
With all due respect the rotor ones are simply aweful.
Glad to see you\'re still onboard though, I\'ve voted in the poll.....
Quote from: Red and SingleOh good god.....I thought we finally had an answer to our problems.
Gary, we want ROUND ones becuase they look OEM.
With all due respect the rotor ones are simply aweful.
Glad to see you\'re still onboard though, I\'ve voted in the poll.....
I voted round too.
No offence but we\'re not RX8 owners with rotor motifs everywhere ;)
Gary is pushing ahead with these now.....
See new thread in the rotaryart section.