Mazda Rotary Club

General => General Technical => Wheels & Tyres, Suspension & Brakes => Topic started by: craicedup on September 25, 2006, 08:22:38 PM

Title: 19" rims
Post by: craicedup on September 25, 2006, 08:22:38 PM
About to buy a set of 19" racing hart rims 10X19 rears and 9x19 on the fronts will i have any problem fitting these.

cheers
Title: 19" rims
Post by: tr1cky on September 25, 2006, 08:46:20 PM
depends alot on the offset you have!?
Title: 19" rims
Post by: craicedup on September 25, 2006, 08:52:17 PM
offset is 30mm

275/35 tyres rear
255/35 tyres front
Title: 19" rims
Post by: LRP on September 25, 2006, 08:54:56 PM
Quote from: craicedupoffset is 30mm

275/35 tyres rear
255/35 tyres front
not sure if that will clear the brakes cant remember what my offset is ikll  find out
Title: 19" rims
Post by: tr1cky on September 25, 2006, 10:23:20 PM
et30 offset on a 10 inch is poss getting abit tight on space.

with a 9.5rim the ideal offset is et35mm(ish), so going wider and lower offset both push the wheel out more.

Have the arches been rolled at all? If mot then this will prob need doing to gain that extra few mm\'s can make all the differance!

As for clearing the brakes, depends what set u you have and the style of rim, not offset.
Title: 19" rims
Post by: craicedup on September 26, 2006, 06:07:28 PM
Havent rolled the arches but ive got hks hyper d suspension with the camber adjusters if that helps checked the rims last night the rear offset is 43 and the fronts are 38
Title: 19" rims
Post by: tr1cky on September 26, 2006, 07:28:07 PM
Quote from: craicedupHavent rolled the arches but ive got hks hyper d suspension with the camber adjusters if that helps checked the rims last night the rear offset is 43 and the fronts are 38

Them offsets won\'t be right, but give you room to use spacers and get it spot on. again the coilovers will give you a little more room to play with.
Title: 19" rims
Post by: craicedup on September 26, 2006, 07:50:35 PM
Thanks for the help
Title: 19" rims
Post by: jamie_eaton on October 26, 2006, 10:11:26 PM
if it helps i have a set of 20"s on mine, no rubbing no problems