Started painting my dash at the weekend, rover gunmetal grey.
Did two coats of primer first and have got to the fourth coat of paint. Now at the moment its quite rough to the touch, I wet and dried it with a 1200 grit paper and this smoothed it right down but has still retained enough paint to look good.
My question is, if I apply another coat will it leave it rough again, or should I just leave it after wet and drying it to keep the smooth finish ? Maybe a finer grit paper ? Dont want to laquer it as it makes it too shiny.
Cheers for any advice
Bulla
It should be fine, I wet and dried mine quite a bit and then applied a thin coat of lacquer to help make the paint a little more solid. I didn\'t want it shiny as such. This photo makes it look a little shinier than it is due to the flash, but the 3 folk that have seen it so far say it looks like stock :)
(http://images.fotopic.net/?iid=yazkhn&outx=600)
Dont want to laquer it as it makes it too shiny
Have you thought of \'Mat\' laquer?
John
i primed twice, sanded each coat, then painted with 2 coats, then laquerd it twice, then wet n dryed with 1200 then poliched upo :) look amazing.. mine was metalic tho :D
Thanks for all replies, I\'ll report on the progress when done and dash reassembled.