Mazda Rotary Club

Cars by Model Type => 3rd generation RX-7's => Topic started by: davyv on August 18, 2006, 07:36:53 PM

Title: air + water temp
Post by: davyv on August 18, 2006, 07:36:53 PM
When you start the car and leave it on tickover what air and water temps do you get. Is the air temp the intercooler temp or air filters. Thanks.
Title: air + water temp
Post by: nikp on August 18, 2006, 07:44:10 PM
air temp is neither: it\'s the temp in the upper inlet manifold.
Title: air + water temp
Post by: sway2003 on August 18, 2006, 07:59:57 PM
You will get a rising water temp... this should be obvious.

The air temp will be a combination of uim temp and air temp depending on which is higher. The temp is decided by a thermocouple which is made up of 2 differant metals that expand at differant rates. This induces a voltage that the ecu measures and applies to a calibration table to referance the volts to determine temp. depending on the temp of the air and the heat soak is the answer....


Sway