Text only | Text with Images

Mazda Rotary Club

General => General Technical => Topic started by: dubber91 on July 22, 2006, 01:06:55 PM

Title: how much play is acceptable on the turbo?
Post by: dubber91 on July 22, 2006, 01:06:55 PM
up and down movement.......

whats ok? T2 series 5
Title: how much play is acceptable on the turbo?
Post by: Grizzly on July 22, 2006, 06:17:32 PM
In and out is the one i\'d pay most attention too.

Up and down is usaly clearance for Oil in the bearings but the wheel oviously should not make contact with the housing.
Title: how much play is acceptable on the turbo?
Post by: Grizzly on July 22, 2006, 06:17:39 PM
In and out is the one i\'d pay most attention too.

Up and down is usaly clearance for Oil in the bearings but the wheel oviously should not make contact with the housing.
Text only | Text with Images