Print Page - Intercooler silicon piping

Title: Intercooler silicon piping
Post by: framey on July 04, 2006, 12:34:55 PM

Hi,
I\'m after some replacement silicon piping for the crossover pipe (both ends). I see on ebay (US) that I can get 3inch piping with those nice T band clamps.

Would these work?
Thanks

Title: Intercooler silicon piping
Post by: framey on July 10, 2006, 03:07:32 PM

Apparently the ones from the states I mentioned are 3" internal diameter so will probably be too big.
Anyone on here get some recently here in the UK?
If so, from where please?

Thanks

Title: Intercooler silicon piping
Post by: banned advertiser on July 10, 2006, 03:17:03 PM

have a look here at sizes
http://www.rotaryart.uk.com/acatalog/Silicon_Hose.html

Title: Intercooler silicon piping
Post by: Bobbit on July 10, 2006, 03:55:31 PM

got my pipes from rotaryart.uk.com, did the job nicely!

Title: Intercooler silicon piping
Post by: nikp on July 10, 2006, 04:04:26 PM

Or //www.viper-performance.co.uk - I just got some pipe work from them.

Title: Intercooler silicon piping
Post by: shaunwil on July 10, 2006, 06:25:36 PM

Its 70mm internal diameter on the pipe. How many are you after ???

Shaun

Title: Intercooler silicon piping
Post by: Ada7 on July 10, 2006, 08:39:49 PM

Sorry for the hijack, but is it nessecary to have humped hoses on the intercooler pipes? Have noticed that the HKS hard pipes have these but some intercooler kits (Trust etc..) dont

Adam

Title: Intercooler silicon piping
Post by: Jit on July 10, 2006, 09:07:06 PM

Quote from: Ada7Sorry for the hijack, but is it nessecary to have humped hoses on the intercooler pipes? Have noticed that the HKS hard pipes have these but some intercooler kits (Trust etc..) dont

Adam

lol i was wondering the same thing!:Giggle

Does anyone know the size for the coupler from the y-pipe to the turbo outlet? And also from the turbo outlet to the top IC hose? If i know them, then i can order them from gary!:chat

Title: Intercooler silicon piping
Post by: nikp on July 10, 2006, 09:47:41 PM

The humped bit is so you can compress them so that you can fit the pipes. It\'s nigh-on impossible to do otherwise.

Title: Intercooler silicon piping
Post by: Iwan on July 11, 2006, 06:58:24 AM

Quote from: one2watchlol i was wondering the same thing!:Giggle

Does anyone know the size for the coupler from the y-pipe to the turbo outlet? And also from the turbo outlet to the top IC hose? If i know them, then i can order them from gary!:chat

them are all 70mm.....

REgards
Iwan

Title: Intercooler silicon piping
Post by: Jit on July 11, 2006, 09:40:50 AM

thanks nik/iwan!

Title: Intercooler silicon piping
Post by: framey on July 11, 2006, 05:02:43 PM

I\'m gonna try the ones from the states.
I think they may be slightly too big but for $8.99 for the tube including those t bolt clamps, it\'s gotta be worth a go,
If they are too big, I\'ll just get some of the sliicone couplings locally.....

Mazda Rotary Club

General => General Technical => Anything Engine/Performance/Tuning related => Topic started by: framey on July 04, 2006, 12:34:55 PM