Hi all
I am looking for some help and advise really, as I\'m not to clued up on RX-7 engines.
Would someone please post up the spec of ttheir engine (or any in fact) that is around the 500BHP mark so as I can get an idea of what serious tunning of these engines requires.
Thanks
Chris
P.S I have used the search function but havent turned up any thing.
heres mine:
Rebuilt and street ported 13B-REW Twin rotary 1308cc
Rebuilt Garrett GT35/40 Single turbo
polished engine components
Apexi Power FC ECU and commander
Apexi AVC-R boost controller
GReddy Type S Blow off Valve
Tial 44mm Wastegate
Fluidyne Aluminium radiator
Magnecor leads + NGK 10/11s plugs
4x 850CC injectors + GReddy elbow, with additional 680cc injectors in holders
Bosch 044 fuel pump
HKS Aditional injector controller III
HKS Rotary type ignition amplifier
Fuel pressure regulator
Large front mount intercooler
Twin oil coolers
Hyper SR cat back exhaust
Dragon De-cat pipe
Underdrive pulleys
Air pump removed
Water injection
GReddy turbo timer
Golden Eagle pressure manifold
OBX silicon pipes
GReddy sandwich plate
Mugen Oil pressure and oil temp. gauge
Autogauge boost gauge
380 at the wheels which is about 460BHP at the fly i think at 1bar boost. I bought the car with half the stuff done though if i was doing it from scratch this is what id choose.
Rebuilt and street ported 13B-REW Twin rotary 1308cc
GT35R turbo for a bit more power, should see over 500 with this one
Apexi Power FC ECU and commander
Apexi AVC-R boost controller
Tial 44mm Wastegate
Fluidyne Aluminium radiator
Magnecor leads + NGK 10/11s plugs
4x 850CC injectors + GReddy elbow, with additional 680cc injectors in holders or 1680 primary and 850secondary
Bosch 044 fuel pump
HKS Rotary type ignition amplifier
Fuel pressure regulator
Large front mount intercooler
Hyper SR cat back exhaust
Dragon De-cat pipe
Underdrive pulleys
GReddy turbo timer
What have you done with your old 35/40 turbo?
i have that in use, im just saying if i wanted over 500 at 1bar then i would choose the GT35r. The second list is what i would do if i was building a single turbo from scratch.
The GT35r is expensive though. The turbo i have was bought in a single turbo kit for the FD at around $1200 i think from //www.cheapturbos.com. Its small size is very good for road use though, not much lag at all
A GT35/40 is a GT35R...
The t04 is the one I am running currently, and yes it is good, but I am looking to buy a new 34R for the engine :)
You can never have enough power heh?? ;)
if you look at the website the one i have is the GT40, blowzilla. sorry for confusion
speak to kareem he is doing my engine with jaydee he can build you the engine you want catch him on 07903758247
No that is a real nice sounding setup. One thing I don\'t get with these engines is why the have different rated injectors? Sorry proberly really stupid question, :)
Air pump removed? I take you mean the aircon?
Also do these engine come with a viscos fan like skylines, spuras and 300zx\'s or do the use electric?
No that is = Now that is
These cars have an air pump, it\'s used to look after the cat and dilute emissions by adding air into the exhaust system. It is driven off the engine and not needed if no cats are being used.
Thanks for that Ricco.
im not fully clued up on fuelling on the rex but heres what i can gather. The primaries are firing all the time, as there are 2 rotors there are 2 injectors. Then after about 4K revs the secondaries come in. This must be a fuel economy thing. Ive not heard any more on the fuelling but id have thought it would be boost related too.
4x 850CC injectors + GReddy elbow, with additional 680cc injectors in holders.
This has confused me as well. As I look at it there are four injector ports on the block, 2 in each chamber, so I\'m don\'t get what the extra 680cc injectors are doing?
Also the second injector have anything to do with the fact these engines are twin turbo as standard and the second turbo kicks in on a sequential system, there for when you do a single turbo conversion you no longer need injectors at different rates because there is no secondary kick, just constantly increasing boost?
Sorry to bombard you guys with questions, am doing my own research on the net, just not turning up much useful info else where.
Thanks
Chris
he also has an extra fuel injector controller
most ppl got for 550 is primaries and 1600 ish secondaries
I see that Richard has an ignition amplifier, I assume the standard setup can\'t cope with the extra demand?
Part 1 done!!!
We\'ve now got a GT 35/40 :D
The porting has started on the engine so hopefully we should have a brand new engine by the end of the week!!!!