Could anyone tell me where to get this spoiler from and how much they are.
Are they easy to fit
Also i have seen universal ones - are they ok or are they bad quality, ie fall off
Thats my old car mate that i built :)
The spoiler started life as a Veilside one but the build quality was crap. It was rebuilt with proper carbon fibre and steel rods through the middle so it would not flex at high speed. The end plates were supplied by a good freind and the stands are from gary goodings old RX7. These were made by dragon motorsport who have gone under.... but Nemesis might be a good place to start. I can supply spoilers through my company but nemesis are the main UK veilside dealer and he may have one in stock at the moment as gary was telling me they have just had a massive shipment of goods.
Anyway, if there are any other spoilers you like the look of, let me know and i maybe able to source you one direct from japan.
Cheers
Adam
adam@hyper-speed.co.uk
Its a great car - i have as the wallpaper on my pc!
I\'m quite new to 3rd gens and am awaiting delivery on my new import (should be a couple of weeks) It has no spoiler at the moment, do you have any examples that you can get? Also where do i go for fitting i dont trust myself putting up a shelf let alone a spoiler!
Nice clean looking motor bud. MS02\'s always look 10 times better in the flesh IMO :)
Have a look around the net - there are loads to choose from.
Start in the aero section of:
//www.takakaira.co.jp
Thats exactly where i was going to point him :) thanks
If you see anything on there let me know and i will see what i can do.
Cheers
Adam
damn! dragon have gone under?? i was going to try and get some of those spoilers struts, ah well, guess i\'ll go with something else :(
Adam on another note where did you get the clear side indicators & also the white rear reflectors or wotever u call \'em? Also anyone know what the code is for side indicator bulbs as i far prefer the clear look so may as well get silvatec type bulbs while i\'m going bout it ;)
Cheers
Si
Right, the fron side indicators in the front wing are from halfords :) MX6 ones
The rear bumper ones i can get for you through my company. Email me at adam@hyper-speed .co.uk for prices mate. You seem to be after a few bits from what i have read. Give me a list of what you want and i can sort you some prices out. I can get just about anything.
Cheers
Adam
QuoteOriginally posted by Gman
Its a great car - i have as the wallpaper on my pc!
I\'m quite new to 3rd gens and am awaiting delivery on my new import (should be a couple of weeks) It has no spoiler at the moment, do you have any examples that you can get? Also where do i go for fitting i dont trust myself putting up a shelf let alone a spoiler!
You don\'t see many in yellow. This is the first 3rd gen I\'ve seen without a spoiler. I think it makes the lines look cleaner. Do you have any other pics from different angles. The wheels are cool too... What are they?
Nice motor
Mike
Anyone know what make the wheels are? Are they Mille one\'s or what ever they are called.
Looking for a decent set of wheels for mine.
QuoteOriginally posted by JayP1
Anyone know what make the wheels are? Are they Mille one\'s or what ever they are called.
Looking for a decent set of wheels for mine.
See my post above; they are Mazdaspeed MS-02\'s...made by OZ/Rays I think from recollection?
About £600 a corner?
They seriously look so much nicer in real life.
Thanks for the positive words - its the first one i saw and after seeing a few more i decided that was the one, the girlfriend took a bit of talking round. One problem is that it is a respray - its a good paint job but they didnt do the engine bay so that is first on the list.
Here is a couple of pics on this page
http://www.mazdarotaryclub.com/forums/showthread.php?s=&threadid=256&perpage=15&pagenumber=2
Anyone have any instructions on using a FC Contoller
i have a PDF file of the manual for FD power FC if that\'s any good to ya? 1.1mb if u do so best lettic eno wot addy you\'d want sending?
Si
Cheers scooby would appreciate that email -graham_watkinson@yahoo.co.uk
tiz sending/sent [paranoid mode on] is yer addy correct above as in with as hyphan - thingamy seemed unusual :confused:
Si
aha got rejected so trying without - bit ie to graham_watkinson@yahoo.co.uk ;)
Si
no its without the -, that meant here it is - .......
just graham_watkinson@yahoo.co.uk
lol u should now have it then. I should add i have no idea wot it all means & i guess it could be dangerous adjusting stuff if u dunno wot yer doing but u have the manual at least now :D lol
SI
I know, i doubt i will go messing with the settings but it means i can mod with blowing stuff up. am i right in thinking it will warn u of things if they start going wrong?
Yep those wheels are definately Mazdaspeed MS02 built By RAYS Wheels
Your Front BAR is TBO type I (fyi)
As for the GT Wings and Others.
How many do you need. If you want a gt wing. There are so many to choose from.
Depends how Huge you want to go.
Mine is a Cusco 3d Carbon wing @ 1600mm wide but waiting for the widebody kit to go on. For a standard FD Make sure its about 1480mm or 1500mm. This seems to be kind of a legality thing.
Also Having the Pylons further apart should remove some of the wobble that some wings have, The mounting system should also be hard to remove. (From a theft point of view.) ie Bolts up from underneath.
Good ones are FEED and Amemiya for this.
Russ.
"Yep those wheels are definately Mazdaspeed MS02 built By RAYS Wheels"
I don\'t think they are mate. If you have a look at the hyper speed website this car is on there and the guy says they are Miglia alloys.
He was talking about the wheels on the yellow car. You are both correct but looking at different pics :)
Cheers
Lee
Well spotted Lee :)
The rims on Adam\'s old car are, err, whatever!
The rims on the yellow car are Mazdaspeed MS-02\'s, they have OZ and Rays in the casting I\'m sure. They are made for the FD, right offsets and widths etc and weigh not too much ;)
And are several hundred a corner new. Seems you either love em or hate em from past discussion on FDUK.
Hey....thats my old car your talking about! :(
:rollin
But would you rather us talk about the new car - im sure that avatar looks like an MR2 :rolleyes: :bandit
Cheers
Lee
Not Mine......:) It belongs to the miss\'s (Bird in Photo)
My RX is on a ship :) Got big plans!
:cool
QuoteOriginally posted by Adam
Hey....thats my old car your talking about! :(
:rollin
Heheh, nowt personal matey :)
Not a big Veilside or Maxpower rim fan myself - although your (ex) car looked very nice all the same.
Mazdaspeed/Rays rims are just...well, Mazdaspeed/Rays.. :D
>homer voice<
Ummm...Mazdaspeed..
>/homer voice<
Gman,
Thats my car your talking about mate. And that picture and screen saver are gonna cost you money in royalties!!:D lol
Seems like you could be local to me mate so if your ever passing Colchester drop in.
Right let me work this out - i\'ve looked at the picture, her indoors has and the dog took a quick glance when he thought i wasn\'t looking - shall we call it 0.37p?:rollin
Its good to know of a few people localish to meet up with for a drive on a normally dull Sunday afternoon. Should get my car in the next 2 weeks so aslong as we can have a pub lunch i\'ll give you a shout.
QuoteOriginally posted by Adam
Not Mine......:) It belongs to the miss\'s (Bird in Photo)
My RX is on a ship :) Got big plans!
:cool
Hi Adam,
nice to hear your next seven is on the way to you!
Regards
Iwan
Bad news guys...
I\'ve just shown my Mrs some of the spoilers on this posting a she made a derogatory comment about the size of mens penis\'. :(
I\'m now considering taking mine off!:rollin :rollin :rollin
same spoiler as i\'ve got mate, looks far better in person and i like it because it matches the height of the roof and you get a perfect unobstructed view out of the rear window :D
looks pretty agressive too i think ;)
holy cow batman & i thought scooby spoilers weren\'t exactly subtle ;)
Si
It\'s that ultimate accesory. An RX7 hand bag!:rollin
Ohh you have a GTiR. I miss mine sometimes, should of kept it as well as the FD.
Wouldnt mind the Porsche either, nice drive!
Lee