Print Page - Profec B Question

Title: Profec B Question
Post by: Fish on June 12, 2006, 01:00:17 PM

Can I take the air feed for the controller from the air line going to the boost gauge?

Or do I need to run a feed to where the solenoid is plugged in.

Solenoid is plugged in post turbo, pre intercooler.

Boost gauge is plugged into the upper manifold nipple.

Thanks
Fish

Title: Profec B Question
Post by: Prof on June 12, 2006, 01:08:57 PM

Your sensor feed needs to come from the manifold pressure - so strapping it into the boost gauge is fine.

Then your control solenoid is cabled between wastegate and pre intercooler take off.

Cheers,

Prof :cheers

Title: Profec B Question
Post by: Fish on June 12, 2006, 09:30:48 PM

Prof, thanks for that.

Fish

Title: Profec B Question
Post by: Fish on June 17, 2006, 09:45:27 PM

Just been out for a play, almost had to talk to nice Mr. Bacon. :spank

Yay for the Profec B! :Thumbsup! :Thumbsup! :Thumbsup!

And if anyone asking about the Apexi Boost controller kit, IT\'S SH!TE!!!!!

Fish

Mazda Rotary Club

General => General Technical => Anything Engine/Performance/Tuning related => Topic started by: Fish on June 12, 2006, 01:00:17 PM