Print Page - EGI ICV to TII?

Title: EGI ICV to TII?
Post by: Sarah on May 09, 2006, 07:36:58 PM

Hi all, Nik here. Quick question...... Will the ICV (idle control valve) from Sarahs EGI fit on the TII? The idle is very lumpy and it has stalled occasionally. Just thought I\'d give it a try unless anyone has any other suggestions?

Cheers

Nik

Title: EGI ICV to TII?
Post by: t2rew on May 09, 2006, 09:55:58 PM

you could try to clean it out with carb cleaner first. make sure theres no crap in it.

Title: EGI ICV to TII?
Post by: Prof on May 09, 2006, 11:39:21 PM

Take a look at the following link:

Cleaning the Bac valve - courtesy of 1300cc.com (http://www.1300cc.com/howto/how2/bac.htm)

Rough idle could also be down to a leaky air hose - so check your hoses, and a faulty 02 sensor or lead come lose.

Title: EGI ICV to TII?
Post by: Sarah on May 10, 2006, 06:58:26 AM

Thanks guys, I will give it a go this weekend :)

Mazda Rotary Club

Cars by Model Type => 2nd generation RX-7's => Topic started by: Sarah on May 09, 2006, 07:36:58 PM