Title: Mirrors
Post by: Brainfire on May 07, 2006, 09:19:25 AM
Post by: Brainfire on May 07, 2006, 09:19:25 AM
I\'ve just read a couple of old posts where people refer to \'folding the mirrors in.\' Is it possible to do this with the standard FD mirrors? I just can\'t see how it\'s done, and don\'t want to break the bloody things by forcing them as I\'ve already had one replaced due to some vandalistic little b\'stard...
Ta
Ta
Title: Mirrors
Post by: G@NDY on May 07, 2006, 09:33:52 AM
Post by: G@NDY on May 07, 2006, 09:33:52 AM
yes mate, the standard mirrows fold in. Have to do mine to get it in the garage, its a bit of a squeeze :eek They can be stiff, when you fold them in, they sort of angle up a bit aswell. Maybe someone has some piccys :Typing
Title: Mirrors
Post by: TRex on May 07, 2006, 11:29:58 AM
Post by: TRex on May 07, 2006, 11:29:58 AM
*Boom Boom*
Title: Mirrors
Post by: Brainfire on May 07, 2006, 12:24:06 PM
Post by: Brainfire on May 07, 2006, 12:24:06 PM
Do you have to just twist them, or is it lift and twist? Mine are as tight as ducks arse...
Title: Mirrors
Post by: TRex on May 07, 2006, 12:43:33 PM
Post by: TRex on May 07, 2006, 12:43:33 PM
Sorry but my experience with \'Ducks arses\' are limited.
Regarding the Mirrors, yes you just push, bend the mirrors rearward and it should more or less follows a natural arc..
Ps. Carry out above instructions at own risk.
I am in no way liable for any breakage or damage that occurs in your attempts.
Good Luck.!["Ignoring]("http://smileys.smileycentral.com/cat/4/4_12_4.gif")
Regarding the Mirrors, yes you just push, bend the mirrors rearward and it should more or less follows a natural arc..
Ps. Carry out above instructions at own risk.
I am in no way liable for any breakage or damage that occurs in your attempts.
Good Luck.
Title: Mirrors
Post by: G@NDY on May 07, 2006, 02:15:26 PM
Post by: G@NDY on May 07, 2006, 02:15:26 PM
QuoteSorry but my experience with \'Ducks arses\' are limitedLol, I have heard Dom that this may not be entirely true matey :Ladys-man
Title: Mirrors
Post by: barmar on May 07, 2006, 06:29:05 PM
Post by: barmar on May 07, 2006, 06:29:05 PM
Try spraying some WD40 in the gap between the base plate and the mirror housing, give it a couple of minutes then try. They can be brittle though I broke one of mine trying to get it off recently, but I was being quite rough with it.
Barry
Barry
Title: Mirrors
Post by: TRex on May 08, 2006, 10:42:39 PM
Post by: TRex on May 08, 2006, 10:42:39 PM
Quote from: G@NDYLol, I have heard Dom that this may not be entirely true matey :Ladys-man
Ok, you don\'t tell them about that and I won\'t say anything about your Rabbit episode....
!["Secret"]("http://smileys.smileycentral.com/cat/4/4_18_3.gif")