i have a 1989 T11 convertable which was taken off the road due to a water seal failure (became steam powered when the engine was warmed up) but lack of time and storage problems may force me to break it, any call for vert bits?
i\'ll have the bonet if its ali and straight
it is ali, straight and black and i have two to chose from.
how much for the whole car, what sort of general condition is it in buddy!
can i still have the spare ali bonnet?
its in good shape, bubbled between drivers door and rear arch.i have spare front wings, two doors , boot but only the drivers door needs changing were somebody tried to punch the lock out. dont not what the cars worth?
2nd dibs on a black bonnet and can collect :D
what suspension is on the car .. Stock ?
does it have stock wheels ?
any other toys on the car ?
ta
stu
.. and worth .. i sold mine for £400 as a non runner , and i once picked up a tII as a non runner for the same price.. break it you should make more to be honest - depends on how much the parts are and how long you can wait ?
me again - you just went off line :(
are both the bonnets black by the way ?
does it have the fancy front lip on the car - can i have dibs on that aswell ( all this is price dependant of course :D )
Stu
maybe pics would help - we are all scavangers around here for FC parts :D
Stu
stu, its mark from wakefield if you can remember me.( window man)
cusco coil overs never fitted
rear mazdaspeed stut brace no cutting these bolt in
efini front buckets never fitted
18inch racing dynamic wheels with p zero tyres back and mich sport front
bov valve imported from japan never fitted
greddy ecu never fitted
fmec controll unit shuts off fuel cut off and other things but forgot its been that long
hood ok
hood cover like new
hks (big but nice noise)single cat back pipe
and more but no time to put together
So its a car and a big box of goodies :yes
Like grinder says, we is all scavengers init.
Seems a shame to break the car - surely someone wants to keep another one on the road ! :(
Is the greddy ecu just a fixed mapped ecu, or is it tweakable ?
it is a shame to break but that may be the only way to recover some hard earned cash back. i think the ecu is fixed but if any body wishes to try before they buy might sort something out.
dibs on the roof if its good condition!
Dibs on the strut brace and potentially the fmec...
... please.
Clearly not awake yet, me.
how much for the coil overs? and 2nd dims on the rear strut brace (price dependent of course) please?
Dibs on the coilovers please - how much do you want? richard[at]loxam.me.uk
price for the coil overs and i\'l join the que.
Sadgoth, once again you are after suspension, hahahhah! How many sets do you need, especially when your car is at RX Motors, well if you have those can i have dibs on yours please buddy!!
well, I still haven\'t got coilovers! I\'m happy with my current setup Konis and Pi springs, but full coilovers would be nice!
Yes, the car is still at RX motors, I suspect it will merge into Tim\'s den of stuff soon! What does it look like btw?
I havent been over for a while buddy so not sure, sorry. Sure they are doing a good job though, watch out for Matt and his liberal application of hammerite though!!!
hiya matey - long time no speak
i see that most people have put dibs on the bits i want - bloody typical
i was after
rear brace ( pleaaaaaaaaaaaaaassssssssssssssssssssseeeeeeeeeeeee )
coil overs ( unless me and mark can come to a comprimise - you sell yours to him and i get his ! )
black bonnet
HKS exhaust ( possibly ! )
can you drop me an email on chojin22 ( at ) yahoo.com - i need to speak to you about other matters
stu
what price for the ecu?
THANKS
Luke
make me an offer on the bits ?
Is the Mazdaspeed rear strut brace complete? Just a little curious as you say it needs no cutting on the tower but the real MS one does.
Quote from: KronIs the Mazdaspeed rear strut brace complete? Just a little curious as you say it needs no cutting on the tower but the real MS one does.
this is the real thing in three parts the cups drop over the bolts inside the towers and the brace then bolts between thru the holes already their thus keeping the speakers in place.
So you have the vin plated straight centre section with the gold anodised style end pieces and both black end plates?
Do you have any pictures of the actual item?
Offer Coilovers: £50
richard [at] loxam.me.uk
Quote from: KronSo you have the vin plated straight centre section with the gold anodised style end pieces and both black end plates?
Do you have any pictures of the actual item?
thats the one, will sort out some pics after weekend.
hey dude im cruisin down to see you a little later this morning! didnt realise your just down the road!
OK then offers
1 - bonnet - £50
2 - rear brace - £35
3 - Coil Overs - £200
stu
What make is the BOV?
MS Rear Brace - £45
errr kron - thats not nice matey !! LOL
Mark ( sadgoth ) - how much are you gonna offer for the coil overs .. if you get them and i dont - can i have dibs on your konis please ??
ta
stu
Quote from: grindererrr kron - thats not nice matey !! LOL
stu
Neither is offering £35 for the strut brace when Elford Tim called dibs on it first on the previous page ;) :p hehe
I thought I\'d better throw an offer in on the off chance.
Quote from: racerxmake me an offer on the bits ?
what condition are the coilovers in?
give me an idea on how much you are after?
Grinder, i have first dibs on the bonet, when he posts up a price
no probs - im sure he said he had two to be honest :D
not sure where he has gone though ???
just lets see what happens eh
i\'m not fussed on colour unless he has a red one.
these people always seem to do this and then dissapear
Do you have a pic of the seats ?
Would be very interested if in good nick. ;)
Paul
Right, I is back and just noticed that Grinder is trying to jump the queue already :Giggle.
Racerx, can you confirm that it\'s still possible to lower the roof with the brace in place as otherwise I\'m not really interested?
Also, are the door cards in decent nick and without speaker holes above the window switches? I\'m looking for a set of convertible (leather) doorcards that haven\'t been cut up as I\'m planning to put components in the front anyway.
Plus, I need a couple of small bits & pieces - have a look at my separate post, maybe someone can help out?
who , me , never :D
Yeah right, it\'s the innocent looking ones you have to keep an eye on :Thumbs-up
i find that all is fair in love and war when it comes to FC Parts :D :D
saying that there is no sign of racerx - so we all might get nothing :(
IIRC all vert door cards had speaker in the middle from UK mazda dealers, not sure about imports.
what colour is the car?
I need a drivers door and front wing if they are going??
Quote from: elford_timRight, I is back and just noticed that Grinder is trying to jump the queue already :Giggle.
Racerx, can you confirm that it\'s still possible to lower the roof with the brace in place as otherwise I\'m not really interested?
Also, are the door cards in decent nick and without speaker holes above the window switches? I\'m looking for a set of convertible (leather) doorcards that haven\'t been cut up as I\'m planning to put components in the front anyway.
Plus, I need a couple of small bits & pieces - have a look at my separate post, maybe someone can help out?
As AntnicUK said, as far as I can tell all the conv door cards had the extra speakers fitted in the doors. If you found an import Savanna it might not have extra door speakers as they had speakers in the headrests. I do have a good pair of doorcards at home (with the speakers though)
Quote from: sadgothAs AntnicUK said, as far as I can tell all the conv door cards had the extra speakers fitted in the doors. If you found an import Savanna it might not have extra door speakers as they had speakers in the headrests. I do have a good pair of doorcards at home (with the speakers though)
Ah well, in this case I\'ll just keep the ones I\'ve got - they\'re in good nick but didn\'t really need the additional holes...