Text only | Text with Images

Mazda Rotary Club

General => Rotary and General Chit-Chat => "1/4 Mile" times and Dyno figures for UK ROTOR's! => Topic started by: gsb876 on April 23, 2006, 04:05:40 PM

Title: Dyno Figures From Thor-racing Day:
Post by: gsb876 on April 23, 2006, 04:05:40 PM
AS PER TITLE:

Flywheel:

Andrew - 281.1 @ 0.86 bar
Bulla - 333.5 @ 0.94 bar
Shaunwil - 376.3 @ 1.0 bar
Rich C - 336.4 @ 0.95 bar
Trev - 335.3 @ 1.1 bar
Paul S - 251.7 @ 0.83 bar
Wav - 380.8 @ 1.0 bar
Pete S - 452.8 @ 0.8 bar
Freddy - 469.2 @ 1.3 bar
Rixio - 369.8 @ 1.0 bar
Scott - 414.2 @ 0.9 bar
JamesFD3 - 402.1 @ 0.8 bar
Kev Y - 556.9 @ 1.0 bar
Jase - 166.8 @ 0.51 bar
James T88 - 491.4 @ 1.2 bar

AT HUBS:

NORTH:

Scott - ICESURFER - 354 hp @ 0.9bar
Paul - PROBEDB - 215.2 hp @ 0.83bar
James - T88 - 420 hp @ 1.2bar
Rixio - Rixio - 316 hp @ 1.0bar
Freddy - FREDDY - 401 HP @ 1.3bar
Jase - OLDSKOOLROTOR - 142.6 hp @ 0.51bar
Kev-Yorks - 476 hp @ 1.0bar
Shaunwil - 321.6 hp @ 1.0bar

AVE BHP = 330.9 HP

SOUTH:

Bulla - BULLA - 285 hp @ 0.94bar
Andrew - ANDREWRX7 - 242 HP @ 0.86
Pete Sparrow - 387 hp @ 0.8bar
Trev - FD3TYPER2 - 286.6 hp @ 1.1bar
Rich Cheung - 287.5 hp @ 0.95bar
Paul - WAV - 325.5 HP @ 1.0bar
JamesFD3 - 343.7 hp @ 0.8bar
Title: Dyno Figures From Thor-racing Day:
Post by: antnicuk on April 25, 2006, 06:06:10 PM
some great power figures there guys,   nice to Kev\'s putting out some serious horses,  well done mate.

Pete Sparrow,  what set up have you got for 387 at 0.8 bar?,  thats very impressive.
Title: Dyno Figures From Thor-racing Day:
Post by: pete sparrow on April 25, 2006, 07:04:30 PM
Quote from: antnicuksome great power figures there guys,   nice to Kev\'s putting out some serious horses,  well done mate.

Pete Sparrow,  what set up have you got for 387 at 0.8 bar?,  thats very impressive.

Hi
 I gave Ross at Dragon a free reign on my car,and he really worked his magic!
Basic items are as follows...
Dragon monster port.
Greddy T78 Turbo.Uprated primary and secondary injecters.Uprated fuel pump
Spark amp.Water spray injection.Greddy elbow.Front mount intercooler.External waste gate.De-cat.HKS Hyper back box.Apexi ecu and command unit.Boost control.
I\'m bound to have forgotten bits,but thats basically it. Ross was really impressed when i told him the figures. Got plans for more injecters then up the boost,see what can be achieved.
 I\'m very happy with the set up now,and i know i\'m not stressing the engine too much by only running 0.8 bar.
Cheers
Pete
Title: Dyno Figures From Thor-racing Day:
Post by: DRAGON on April 26, 2006, 03:33:11 PM
Great power for that boost. The map is very safe aswell, quite rich and not too much ignition. The porting makes a lot of difference. Really interested to see what she makes at over a bar, because thats when the turbo and port will be most efficient.
Title: Dyno Figures From Thor-racing Day:
Post by: JayDee on April 26, 2006, 04:27:28 PM
Ross, is that a monster port or a big street port??


Quote from: DRAGONGreat power for that boost. The map is very safe aswell, quite rich and not too much ignition. The porting makes a lot of difference. Really interested to see what she makes at over a bar, because thats when the turbo and port will be most efficient.
Title: Dyno Figures From Thor-racing Day:
Post by: peterwolds on April 26, 2006, 05:20:11 PM
Pete
You got a pilots license now with that power ?  :cool  results
Pete
Title: Dyno Figures From Thor-racing Day:
Post by: DRAGON on April 26, 2006, 05:29:27 PM
\'Monster Street port\' or really it should be called the Camoflage port. Because thats the car that had to blow a few engines before the design was finalised!
Title: Dyno Figures From Thor-racing Day:
Post by: JayDee on April 26, 2006, 05:41:12 PM
haha, i remember it well, get some boost through it then watch the power, get him in my team!

Quote from: DRAGON\'Monster Street port\' or really it should be called the Camoflage port. Because thats the car that had to blow a few engines before the design was finalised!
Title: Dyno Figures From Thor-racing Day:
Post by: bnaellis on April 26, 2006, 06:15:26 PM
Quote from: JayDeehaha, i remember it well, get some boost through it then watch the power, get him in my team!

You got your car up & running now mate?
Title: Dyno Figures From Thor-racing Day:
Post by: DRAGON on April 26, 2006, 06:36:25 PM
Quote from: rotaryimports.comYou got your car up & running now mate?


HA HA, Oh Brian your such a joker. Dullforce get his car running! HA HA HA HA
Its a museum piece, it doesn\'t move.
Title: Dyno Figures From Thor-racing Day:
Post by: John Yorke on April 26, 2006, 06:59:16 PM
Quote from: DRAGONHA HA, Oh Brian your such a joker. Dullforce get his car running! HA HA HA HA
Its a museum piece, it doesn\'t move.

Oi Ross whats this I hear none of yours are moving......till Rotorpop :rollin  :rollin
Title: Dyno Figures From Thor-racing Day:
Post by: DRAGON on April 26, 2006, 09:21:06 PM
Yeah but when the they do move. They will be moving VERY fast :)
Title: Dyno Figures From Thor-racing Day:
Post by: pete sparrow on April 26, 2006, 09:59:42 PM
Quote from: DRAGON\'Monster Street port\' or really it should be called the Camoflage port. Because thats the car that had to blow a few engines before the design was finalised!

Hope you\'d ironed out all the probs before my car????????? Don\'t fancy my car being a test station!!!!!!!!! :rollin
Title: Dyno Figures From Thor-racing Day:
Post by: JayDee on April 27, 2006, 08:48:00 AM
Hi Brian,
No I haven\'t thinking of selling them all and getting a porker, got to beat ross round the track first to take his circuit car off of him, so i will still have one. haha

Quote from: rotaryimports.comYou got your car up & running now mate?
Title: Dyno Figures From Thor-racing Day:
Post by: pete sparrow on April 27, 2006, 06:04:47 PM
Quote from: peterwoldsPete
You got a pilots license now with that power ?  :cool  results
Pete

Hi Pete
 Cheers mate,yes i was chuffed to say the least. Got the license,cut it out the back of a cornflake box a few days ago!! :D
Cheers
Pete
Text only | Text with Images