Text only | Text with Images

Mazda Rotary Club

General => General Technical => Topic started by: dubber91 on April 11, 2006, 10:34:36 AM

Title: TPS Adjustment?
Post by: dubber91 on April 11, 2006, 10:34:36 AM
Been told i need to adjust my TPS. How do you do it on a second gen NA 13b? (1988). I can find the check connector, just cant find the adjuster!

Steve
Title: TPS Adjustment?
Post by: shaunwil on April 11, 2006, 06:45:48 PM
Is it the same as the fd one where you loosen off two bolts and rotate the tps until it is reading correct and then tighten up again ?

Shaun
Title: TPS Adjustment?
Post by: dubber91 on April 11, 2006, 06:52:22 PM
It OK! found it now!

Using the voltmeter method, will it only be correct when the en gine is warm?

Steve
Title: TPS Adjustment?
Post by: shaunwil on April 11, 2006, 06:58:37 PM
If it is the two bolt method then your better off doing it when cold, that area can get very hot !

Plus i usually do it when its cold without any problems !

Shaun
Title: TPS Adjustment?
Post by: dubber91 on April 11, 2006, 07:00:53 PM
It different but thanks for your helP!
Text only | Text with Images