Hiya chaps,
I have a momo steering wheel and the boss the company sent through is obviously the wrong one part number #5705 . does anyone know what the correct part number for these steering wheels are.
My Rex is a FD3S 1995 without a airbag.
Also does anyone have a picture of there boss unfitted and how the horn is wired up? do you have to remove that white plastics connection thingy ( lol )
Many thanks Chaps
Chris
im in the middle of doing this now with a momo mx5 hub. The horn is tricky, ive worked my way to the wires behind all the plastic/ copper ring on the column and am going to wire a separate switch in to the dash somewhere. Really simple, cos getting the horn button to work requires wires going thru the boss and i think thats dodgy.
haaa haaaaaa fitted no prob.
What i did was use the FC boss momo 5705
....laithed about 5mm off the bottom of it which would allow the self cancelling indicator plastic pegs to reach the boss.
...Then i pulled off the copper strip
.... undone the 4 screws holding on the steering column which holds on a white piece of plastic and cut teh 3 wires holding that on.
....out of the 3 wires i taped up the blue and brown wire and connected the white wire to the positive of the horn.
... the negative of the horn is via the silver ring that comes with the boss that goes under the steering wheel and earths to the steering column.
Easy peasy it all works A OK
Took me no more than 20 mins and a slow pace.