Mazda Rotary Club

Cars by Model Type => 3rd generation RX-7's => Topic started by: Tyson007 on March 19, 2006, 07:11:11 PM

Title: HELP - Can\'t select a gear!!!!!!!!!!!!!!
Post by: Tyson007 on March 19, 2006, 07:11:11 PM
Hi guys
Took the car out for a spin in the lovely weather and all of a sudden my auto gear box fell out of gear.

Even after putting the car into neutral and re-selecting Drive it wouldn\'t go!! The engine just kept running and luckily the car rolled to safety.

The only way I could get the car to move was to put it into park, turn the car off and reselecting Drive. The car then proceeded for a about 10 yards then fell out of gear again :flamed .

Plus I could hear some strange noises under the gear box when I restarted it.

Lucily I got home with a combination of rolling and driving 10 yards at a time, I must of restarted the car 20 times I was amazed that the engine didn\'t flood. Lucily I had a mate in a TVR Tuscan who followed me home to safety :driving .

Does anyone know what has gone wrong????????????? :xconfused  :xconfused
I am really dissapointed and now considering a manual conversion as I don\'t trust the auto gearbox  :reallymad .

Possibly looking at a engine rebuild as the car it leaking colant, can anyone recommend anybody to do both of these jobs.

Cheers

Kirk & Sherry

(http://memimage.cardomain.net/member_images/3/web/2127000-2127999/2127245_45_full.jpg)
Title: HELP - Can\'t select a gear!!!!!!!!!!!!!!
Post by: kev-yorks on March 19, 2006, 07:26:28 PM
sounds like you could have a dead gearbox. If you want to stay Auto i\'m sure Carl Hayward had a auto box in last time i was down there and he\'s probably closest to you. If you want to convert to manual he should be able to do that as well as a engine rebuild. His computer has been down so i\'d ring him if i where you describe the symptoms and he might say its a quick fix.
Carls numbers
 01635 846598
 07776 304174
Regards Kevin
Title: HELP - Can\'t select a gear!!!!!!!!!!!!!!
Post by: iaint on March 19, 2006, 07:28:06 PM
From what I know about auto boxes there\'s a whole host of reasons this could happen ranging from cheap to fix (tightening up or topping up the gbox fluids) all the way up to a rebuild.  Not sure how easy the conversion to manual is though...
Title: HELP - Can\'t select a gear!!!!!!!!!!!!!!
Post by: Tyson007 on March 19, 2006, 07:41:40 PM
We have checked the dip stick at the back, is there anywhere else that I should be checking?
Title: HELP - Can\'t select a gear!!!!!!!!!!!!!!
Post by: Bobfish on March 22, 2006, 11:29:18 AM
Conversion from Auto to manual is not a bad swap, you might need a different rear iron though, and a new starter motor, flywheel and front counterweight.

Plenty of people can do this, if you need any advice, 07977015912
Title: HELP - Can\'t select a gear!!!!!!!!!!!!!!
Post by: framey on March 22, 2006, 12:08:18 PM
When you check your oil level, is your engine running and is it in gear? Apparently this is how you are supposed to check the level.
Title: HELP - Can\'t select a gear!!!!!!!!!!!!!!
Post by: DRAGON on March 22, 2006, 12:17:38 PM
We have a couple of Auto boxes in stock.
Title: HELP - Can\'t select a gear!!!!!!!!!!!!!!
Post by: Bobfish on March 22, 2006, 04:35:34 PM
sorry i wasnt very informative on the phone mate, i was stuck at work so couldnt talk too long or in much detail. Call me after 6 if you wanna talk further.