Text only | Text with Images

Mazda Rotary Club

General => General Technical => Anything Engine/Performance/Tuning related => Topic started by: asp on February 25, 2006, 06:40:11 PM

Title: fuel swirl pot
Post by: asp on February 25, 2006, 06:40:11 PM
iv got an idea what pipe goes where,
one pipe on the top////breather back to tank
two on the side////feed to pot and return form 044 pump
one on bottom/side////feed to 044 pump


is that right?
Title: fuel swirl pot
Post by: MikeLMR on February 25, 2006, 06:45:26 PM
sounds about spot on to me !

Return should be from your pressure regulator tho\'
Title: fuel swirl pot
Post by: kev-yorks on February 25, 2006, 06:52:13 PM
Thats the way i\'ve mine piped up.
Kevin
Title: fuel swirl pot
Post by: antnicuk on February 25, 2006, 07:34:42 PM
me too......
Title: fuel swirl pot
Post by: asp on February 25, 2006, 08:12:35 PM
cheers guys,
the two on the side/the feed to the pot and the return from 044,does it matter whitch way round thay are,as one is an inch or so higher than the other,
Text only | Text with Images