Guys
Im still cant decide what colour to respray my FD. I want something with a bit of class as I dont want that boy racer look. I LOVE black cars, that look after just having polished it... nothing like it. But if im going to the expense of getting a respray I would ideally like a non-factory colour. Ive sought of tied it down to a dark maroon mettallic or the RX8 blue, but.......
ive just noticed that my C West light conversion has the \'border\' matched to the colour of my car (pic attached). I can imagine this being loads of agro a) changing the colour on the inside of the lens and b) finding a matching vinyl to match te blue or maroon.
So im thinking.... how about a two tone paint job? keeping the pearl white at the front and changing to the RX8 blue at the back? I thought that might look quite nice before.
So opinions would be great - dont want it too look crap and reduce the value of the car. Also, anyone got any ideas of how the cross over from white to blue should be done ie staggered, straight line and where abouts to change?
Any Paintshop gurus fancy a play? :)
You dont want that boy racer look......look at that spoiler !!!!!
Just joking mate, nice looking car. not a big fan to the two tone jobs, prefer a solid colour.
Heres an idea....dont shoot me down, how about getting the whole car bar the front light bits and the wing mirrors in the blue you mentioned. Then the car would have the white alloys, white light cover bits and white wing mirrors plus you could do the centre of the rear wing white ? Prob a stupid suggestion but an idea.
I do like the RX black but I am constantly cleaning mine lol
Gareth
keep with white mate! , rexs look great in white! u no it when uve just spent all day waxing it up!
Gmogle: thanks for the suggestion. I actually quite like that idea. Thing is its one of those that would either look fantastic or could end up looking pants. And after spending that sort of money that would be hard to swallow :( Suppose I could do it then if I change my mind do the whole thing in the blue?? I was planning to have the wheels in Anthracite or Black with a polished lip. Perhaps I could have then redone in white with the polished lip? mmmmm (any one any good on Paintshop who could do this for me? I would owe you a :beer
Why not look at a flip coat to go over the white???? I know they normaly go over black but you can realy change the way the flip colour rects by using a different base coat!!!
You can realy get some nice effects if you go for the right one!!!!
Jono
that sounds good as well. Ive always considered flip paint jobs to be expensive though - but as I have the white base coat would this reduce the cost? My white is a slight pearl (if that makes a difference?)
Quote from: Jono FD3Why not look at a flip coat to go over the white???? I know they normaly go over black but you can realy change the way the flip colour rects by using a different base coat!!!
You can realy get some nice effects if you go for the right one!!!!
Jono
the 2 tone idea sounds good, although for the colour transition, I would have the white fading into the blue, rather than a solid or staggered line. Obviously this will need a very good sprayer to pull this off and blend all of the car uniformely. However, what I suggest you do first mate, is go to a good bodyshop of your choosing and look through their colour swatches.. you may see a colour that jumps out at you. Rage and House of colour do some very striking pearls, candys and flips.
Yeah, I would prefer the fade to be honest. Have you got the contact details of this body shop?
I have been recommended by a couple of people about this place.....
http://www.bodymastergbltd.co.uk/mainindex.html
anyone on here had any dealings?
Quote from: Jin Kazamathe 2 tone idea sounds good, although for the colour transition, I would have the white fading into the blue, rather than a solid or staggered line. Obviously this will need a very good sprayer to pull this off and blend all of the car uniformely. However, what I suggest you do first mate, is go to a good bodyshop of your choosing and look through their colour swatches.. you may see a colour that jumps out at you. Rage and House of colour do some very striking pearls, candys and flips.
How many Liters/Pints/Gallons do you need to spray a car
I sprayd my hilux 2 years ago with about 1 liter of black base coat (plus thinner & hardner so it probably worked out about 1.5 - 2 liters in total) and about 2/3rds of a liter of laquer!!
Always better to get too much rather than too little!! I\'d be looking at about 1.5 liters of base coat +hardner & thiner and about 1 liter of laquer + hardner & thiner to do an FD!!!!
But it depends on what paint eg. pearl / flip coats probably 2 liters!!!
MARK
all you would need to do if you were to put a flip over your white base is key it up and your ready to go!!!! scotch pad the whole car to brake the shine then your set to mask and spray your flip / pearl / candy or what ever you choose straight over the existing paint!!
unless there are some dents you have to remove / fill, you should half the cost of the respray, prob about £500 rather than 1000 - 1500!! especialy if you prep the bodywork!!
Jono
Quote from: RixioHow many Liters/Pints/Gallons do you need to spray a car
it depends on the type and the coverage properties of the paint and also if you have the flatbacked or brought down to the metal. Darker colours cover better, but lighter colours often take more paint to stop the ground coat showing through. In the end on my FD, it took nearly 5 litres of colour before the clear coat went on!
So let me get this straight: it would cost me less to have a flip? Wow, that would be great. I would only want a subtle flip though. So what colours would work well with the white base coat?
Maybe I could do my two tone idea, but with the white having a blue flip to match the back ie: in some lights it looks as though the car is all one colour! :)
Quote from: Jono FD3MARK
all you would need to do if you were to put a flip over your white base is key it up and your ready to go!!!! scotch pad the whole car to brake the shine then your set to mask and spray your flip / pearl / candy or what ever you choose straight over the existing paint!!
unless there are some dents you have to remove / fill, you should half the cost of the respray, prob about £500 rather than 1000 - 1500!! especialy if you prep the bodywork!!
Jono
Quote from: \'M@r{\']Yeah, I would prefer the fade to be honest. Have you got the contact details of this body shop?
I have been recommended by a couple of people about this place.....
http://www.bodymastergbltd.co.uk/mainindex.html
anyone on here had any dealings?
I don\'t know of any in the Cornwall area, only of ones around here..
If this company has had people singing it\'s praises then probably is good.
Or around Milton Keynes.....
Quote from: Jin KazamaI don\'t know of any in the Cornwall area, only of ones around here..
If this company has had people singing it\'s praises then probably is good.
Quote from: \'M@r{\']So let me get this straight: it would cost me less to have a flip?
Not necessarily. Take into consideration the cost of the piant itself can vary greatly from as little as £150 to £800+ per litre of paint.
Quote from: Jin KazamaNot necessarily. Take into consideration the cost of the piant itself can vary greatly from as little as £150 to £800+ per litre of paint.
Correct,.
If your prepaird to travel I could put you in touch with a spry man who has started to use dry powder flips from the states, and he is a wizz with a spray gun!!!
He quoted me £650 - £700 to respray my FD - Black base with the dry powder flip over the top, but I would have to prep the car myself!!!!
He\'s in Freystrop, Pembrokeshire. if you want his number let me know and I\'ll put you in touch.
Jono
Is black a good base coat to spray flip onto? Cos my new 7 is black...
Dont mean to sound daft, not clued up on all this paint jargon
If so id have to scotch pad the car then its ready to spray with the flip paint? Sounds abit too easy!!! So id need the Flip obviously thats 3L £550 + Hardener £? + Laquer £?
I suppose if the recommendation is good enough then travel shouldnt be a problem. So what are Dry Powder Flips?
That quote, was that including the Black Base? And how much do you reckon it would cost if he did the prep work?
Thanks
Mark
Quote from: Jono FD3Correct,.
If your prepaird to travel I could put you in touch with a spry man who has started to use dry powder flips from the states, and he is a wizz with a spray gun!!!
He quoted me £650 - £700 to respray my FD - Black base with the dry powder flip over the top, but I would have to prep the car myself!!!!
He\'s in Freystrop, Pembrokeshire. if you want his number let me know and I\'ll put you in touch.
Jono
very very basic mockups, hey its sunday night, what do you expect.
although possibly obsolete now due to all the flip ideas and stuff...
(http://i15.photobucket.com/albums/a399/dandantrash/RXSidereedzigzag.jpg)
(http://i15.photobucket.com/albums/a399/dandantrash/RXSidereedbluefade.jpg)
I think the fade looks miles better but having sprayed a few cars with fades myself, they are a barsteward to get right so you really, really need a good sprayer for that.
Oh, and personally I\'d either go for a darker blue overall or continue the fade into something like midnight blue. But hey, that\'s just my taste...
Thanks Dan for your efforts - thats really appreciated. Does give me an idea of what it could look like. I think I definitely prefer the fade but perhaps with a darker blue. The other one could look better - perhaps with the slant the other way and slightly towards the front.
Thanks again, definitely owe you a :cheers :guinness
NO!!!!!!!!!!!!!
White is THE colour.
The only problem is those hideous wheels. no offence.
Spend your cash elsewhere. then If someone keys it .. who cares. :Thumbsup!
(//%5BIMG%5Dhttp://i30.photobucket.com/albums/c349/rextreme/RX-FQred1.jpg)[/IMG]
(//%5BIMG%5Dhttp://i30.photobucket.com/albums/c349/rextreme/RX-Side-reed2.jpg)[/IMG]
What rims are they, look rough
Im not sure what they are. They have Independance something or other written on them. To be honest the picture doenst do them justice, they look a lot better in the flesh - they have a nice dish effect, especially on the back. I was thinking about having them re-done with a polished lip and either black or anthracite spokes. Mind you now your making me think..... :)
They look like an old sparco design.
But you can never be sure. only about 1 million different rim types in japan.
Paint them black for a start.
I really like the Re-amemiya N1 Body kit of that generation and I think it looks best in white. Just my opinion.
If you see any car that you hate
Then see it in black it looks ok. Because you cant see the lines of the car.
This is where bright or clean colours and good design come together.
I recon it looks awesome now..