Print Page - ignitor

Title: ignitor
Post by: mpk490p on December 18, 2005, 06:32:45 PM

i have discovered i need a ignitor according to the wiring, i didnt have one on the donner car but i have the wiring for it on the new one, it sits near the coils and has a yellow and green with a black a white connecter on each end from each coil, does anyone else have this on there\'s i have a box full of bits but have no idea what im looking for
thanks
mark

Title: ignitor
Post by: oldone on December 18, 2005, 06:46:38 PM

Quote from: mpk490pi have discovered i need a ignitor according to the wiring, i didnt have one on the donner car but i have the wiring for it on the new one, it sits near the coils and has a yellow and green with a black a white connecter on each end from each coil, does anyone else have this on there\'s i have a box full of bits but have no idea what im looking for
thanks
mark

Small square box with 4 male adaptors on....

Title: ignitor
Post by: mpk490p on December 18, 2005, 07:11:00 PM

is it in-line or does it screw to the engine bay?
might be easier to source one as the garage has around 4 rx7 spares parts it could take some time!

Title: ignitor
Post by: MikeLMR on December 18, 2005, 07:12:42 PM

I thought they lived on the side of the dizzy ? or are those two black boxes somthing else ?

Title: ignitor
Post by: mpk490p on December 18, 2005, 07:16:15 PM

Quote from: MikeLMRI thought they lived on the side of the dizzy ? or are those two black boxes somthing else ?

thats what i thought but they run on the other wiring that goes across the front strut, i will have a look at the other rex as thats a b and the new ones a c, it ran fine without it in the breg but it must need it in the creg as im getting a very weak spark if any on the leading coil.

Title: ignitor
Post by: mpk490p on December 18, 2005, 08:30:00 PM

could anyone get a picture?
thanks

Title: ignitor
Post by: MikeLMR on December 18, 2005, 08:39:34 PM

this part is labeled as an igniter

Title: ignitor
Post by: mpk490p on December 18, 2005, 09:30:25 PM

thanks i found a picture in Victoria british also just need to find one and hope it does the job!

Title: ignitor
Post by: mpk490p on December 19, 2005, 07:14:00 PM

had another look tonight and it seems i need 2 ignitors one for each coil, the guy pulled the engine out before i got to it and must of took them with it, can fiqure out why the wirings different in a c and b reg but rather than change the lot im on the hunt for them if anyone can help
thanks
mark

Title: ignitor
Post by: mpk490p on December 27, 2005, 10:23:12 AM

the leading ignitor had failed got another one and she fired first time (well pleased) its amazing how you forget about all the grif when they finally work!
the timming needs some tinkering but atleast shes running, i can finally get her out the garage to fit the inside up
thanks for your help
mark

Title: ignitor
Post by: oldone on December 27, 2005, 05:56:59 PM

HEY YAY YIPEE COOL DUDE...... :burnout

Mazda Rotary Club

Cars by Model Type => 1st generation RX-7's => Topic started by: mpk490p on December 18, 2005, 06:32:45 PM