looking into selling my car, just seeing what sort of prices i might get for the car and bits that i have too,
the car is white FC TII 91 J-reg, 140k on the clock, approximately 50k (mainly motorway miles) on the J-Spec engine, series 4 housing and rotors, series 5 turbo and ecu set up, runs lower compression enabling higher boost (i think if i remember correctly to what i was told),
has got metal mesh cone filter (like the Blitz style ones), Blitz dump valve, Blitz FATT, Greddy e-01 boost controller, Pivot Boost Gauge, cat back exhaust of unknown make (came off gmans car, front part is on fc3sleo\'s car), Rays Engineering Mazdaspeed MS-01 17" alloys (sprayed in ford graphite grey) originals still available, Momo steering wheel, have installed a Clifford concept 600 alarm on it, i also have the original motor in parts as spares or can be rebuilt to fully working order (blew a tip when previous owner had the car), also have a set of HKS Hypermax coilovers with the pillow ball mounts not put on, and a set of front and rear Cusco strut bars not put on,
as i have said, i am just considering at the moment, but if offers are good enough, i would sell, cheers,
Patrick, :wave
sorry you have to sell - but if you wanna sell the rear strut brace - then let me know !
how much are you looking at for the HKS Hipermax coilovers?
i am not sure as to how much i want for it sadgoth, so give me an offer, same with you grinder for the rear bar, i am just seeing right now what offers i get, i have already had someone offer me for the car without the mazdaspeed wheels, so just seeing how much i can sell all for now.
cheers,
you really want me to make an offer .. brave man !!
its defo the bar that goes on top of the rear struts ??? ( i take it you have to cut a hole in the strut tower for them to go thru ?? )
i have no idea - so £30 ?? ( thats based on FC3Sloe\'s : Re-Amamiya front strunt brace 30 )
second dibs on coilovers ;)
grinder, price seems fair, but as the thread title says maybe selling, this will be decided on offers i get,
how much do you guys reckon a broken engine would be worth? and anyone interested in it for some spare parts?
sadgoth and bandit, pm me an offer for the coilovers, cheers,
any offers for the MS-01\'s??
pat
yeah thats fine mate - just let me know
and a broken engine .. err i paid £20 for mine !! :D
Do you have pictures of the car? How much do you want for it as it is with all the toys? I know someone who may be interested.
PM me a rough price and I\'ll pass it on along with the pictures.
Cheers.
kieron, i cant pm, if you give me an e-mail address then i will send some details there,
cheers
also, to add to the list, i will be getting a de-cat pipe and downpipe sorted in the next few weeks, as the cat is blowing slightly, all this will be replaced with a complete straight through pipe,
Kieronash@hotmail.com :D
Pat need some info on the colovers matey before i try and guess how much to pay... are they near new/used... if used how old etc... :) And if you know what spring rates are they
coilovers are used, but looks as good as new to me,
(http://img370.imageshack.us/img370/9049/8eb96cj.th.jpg) (http://img370.imageshack.us/my.php?image=8eb96cj.jpg)
well i only just bought these and they haven\'t even been on my car yet, springs rates i am afraid i do not know, but they have the adjustable top mouts on them, :)
right then, i cant pm as im not a member as i cant afford to join as i keep buying stuff like this... lol... but drop me an email to burtthebandit@hotmail.com and we will talk money :) Im very interested if the price is right :)
going to work now guys so, and i have emailed kieron and bandit, anymore offers guys??
pat,
I\'d love to, but I\'m not sure on the available cash at the moment, drop me an email to markparmstrong@hotmail.com and we can discuss. cheers mate
picture is not great, but just to give you guys an idea of how it looks, but will get some more up if requested,
[img=http://img435.imageshack.us/img435/8708/photo00053gn.jpg] (http://imageshack.us)
Patrick
ok, i will try again..........
(http://img435.imageshack.us/img435/8708/photo00053gn.th.jpg) (http://img435.imageshack.us/my.php?image=photo00053gn.jpg)
How many sets of suspension do want Sadgoth, lol, i suppose it means one of you many sets will go babck up for sale.
I will take 3rd dibs on the coilovers Pat.
if you still got the coilovers, email me a price at Lsun69@aol.com
ta
Quote from: jetpilotHow many sets of suspension do want Sadgoth, lol, i suppose it means one of you many sets will go babck up for sale.
I will take 3rd dibs on the coilovers Pat.
That would be the plan, much as I like the Konis, I really wanted a set of full coilovers
:confused: hmmmm..........so much interest on the coilovers, but none on the car?? someone really needs to take the car off my hands for me to sell the other toys i have, which means it needs to be a good price too, as i need to gather up some money for something, but as i said before, if it doesnt go to plan, then i will just keep the car and have other plans for the money,
Pat :(
How much were you realistically looking at for the car?
i\'ll have the front lip if your selling it
Sorry to dig this back up! :wave
Patrick are you still considering selling up??
I maybe intrested, can you give me an idea on price?? And some more pics?? Have you sold coilovers seperatly?? Would be intrested in the lot, for the right money!
Here\'s my email- tr1cky_1@hotmail.co.uk
Cheers Rich
Hi Pat,
Can you email a price to neloae86@!nospam!gmail.com?
Cheers
email sent to nelo
add to the list, the car has now got brand new front tyres, which are yokohama parada spec 2 tyres, and also i have FD front calipers on it now
Hi mate,
Never received your mail. Can you resend to the above address and don\'t forget to remove the !nospam! bit :)
Thanks
Pete
Wot kind of ££££ are you after for your T2? Scoomfd@hotmail.com
sorry for major delay on this, but i have been very busy and have been f****d around by someone with the coilovers and cusco strut bars, basically they are not available anymore and i am just getting my money back, but car is still for sale for right price, but on the addition to the list, it has got a drivers Bride bucket seat fitted now, leave me an e-mail and i shall get back to you as soon as, pattty252@hotmail.com
cheers,
Patrick
just being nosey - how are you getting your money back on the suspension ??
now im keeping my FC i could do with some suspension - and yours look COOOOOOOOL !
if they are 100% not for sale then fair enough
stu
well, i have got reciepts for them, and if money does not come back then will have to be taken to court, as i also have someone over there doing this for me, but there is still a remote chance they will arrive, BUT i am just mentioning it here just in case i disappoint people by saying yes, but they never turn up,
stu, if they ever do turn up, you would still be 4th dibs for them! :D as i do remember lots of interest in them, unless they are not interested anymore, you also wanted rear brace right? i will let you know if they ever do get to me,
Pat
ah right - i take it you have ordered them from abroad !
i hope they do arrive - just for your sake
take care matey
Stu
(http://img91.imageshack.us/img91/923/photo02916ye.jpg) (http://imageshack.us)
(http://img87.imageshack.us/img87/3254/dsc043820dd.jpg) (http://imageshack.us)
(http://img155.imageshack.us/img155/5991/dsc043847qw.jpg) (http://imageshack.us)
(http://img155.imageshack.us/img155/4964/dsc043856su.jpg) (http://imageshack.us)
new wing supplied with sale.......
(http://img45.imageshack.us/img45/2294/dsc043871px.jpg) (http://imageshack.us)
paint flaking on back, but primer isstill intact.......
(http://img87.imageshack.us/img87/4323/dsc043881gz.jpg) (http://imageshack.us)
(http://img45.imageshack.us/img45/543/dsc043891db.jpg) (http://imageshack.us)
(http://img87.imageshack.us/img87/8991/dsc043913io.jpg) (http://imageshack.us)
it was cold when i took this!! :(
(http://img87.imageshack.us/img87/3719/dsc043940gf.jpg) (http://imageshack.us)
(http://img45.imageshack.us/img45/8461/dsc043959ee.jpg) (http://imageshack.us)
(http://img87.imageshack.us/img87/6537/photo02675hw.jpg) (http://imageshack.us)
(http://img87.imageshack.us/img87/4500/photo02748qq.jpg) (http://imageshack.us)
(http://img87.imageshack.us/img87/5740/photo02832yg.jpg) (http://imageshack.us)
(http://img45.imageshack.us/img45/605/photo02866am.jpg) (http://imageshack.us)
sorry it took so long for the photo\'s, but their here eventually!! :D
Any idea what compression is like on the engine mate?
Can you email me with some kind of idea what you\'re after ?
ehnus@hotmail.com
Emailed you! :)
as there is quite a bit of interest in the car now, can anyone give me any ideas as to where is the closest i can get a compression test done? and how much roughly it would cost? i guess that this would ease everyones minds about the engine, ;)
Cheers,
Pat,
Probably going to be RoTechniks or Carl Hayward for a compression test if you in Oxford...
MMMMMMMMMMMmmmmmmmmmmmmmmm FMIC :D :D :D :D :D :D :D
i\'m going to rotechnics on saturday for a compression test it\'s £25 if i remember correctly and they said it takes about 1/2 hour.
cool, £25 is not too bad i guess,
Grinder, you interested in the intercooler? as you can see the bottom is dented slightly, if i didnt mention it before, it needs to be fixed, its leaking slightly around them areas,
i think i can remember speaking to you about it ages ago .... no idea how much they are to fix though ???
yea i think it was you that was talking to me about it, since then i have got a quote for repairing it, £120, thats to cut off the bottom 2 bars and then filling up the holes on the end tanks, but this is from someone i dont know completely, so if you know someone or ca do it yourself, it could be a lot cheaper i guess,