Mazda Rotary Club

Crash my TII at northampton raceway on sunday and don\'t know if its worth fixing it, what do you guys think??

That will be lots of £££ to repair mate, gutted for you.
What hit first, back or front?

You may be best off keeping the engine etc and looking out for a TII with a knackered engine, they go very cheap atm.

If you do break it, whats the spec on the exhaust? And how much?

2.5 downpipe to 2inch center decat then hks hiper cat back

OH NO!!! you alright?? the damage isnt that bad, you could probably jig the back end out bit of filler etc, a new wing - i got a spare (not in the best nick but its straight!), anyway what you planning on doing then?

if you break it, i could do with the side skirts!

Hope you can save it mate :)  If not, let me know and I\'ll make you an offer on the zorst.

Sorry to see that,  were you drifiting or just track day ing it?  

now watch all the vultures floating around looking for cheap bits,  thats the problem with Tii bits,  the people who want them are poor, thats why we have em....
You maybe best off buying a good shell if you can find one and do the work your self, as mentioned above.
What suspension do you have?,  put me down for first dibs on it?
regards
tony

if its a drift car batter it back into roughly the same shape and go out and compete again ... it\'ll only get bent again. (no disrespect to your driving BTW ... its just enevitable in any sort of competitive driving)

looks like it was a good one. anyhting can be repaired, its just how much you want to spend. if you decide to break it ill come up and buy a few bits

ouch - thats painful matey !

if you break it - let me know what toys are on the car and i could be interested

typically you have stuff i have just bought - top hose sender and the BOV , but is there anything else ( oil temp gauge :) )

failing that - knock it back into shape with a big hammer - its a drift car - they are suppose to look "used" :)

Stu

Yeah it was nasty I felt bad watching it happen.  Someone got the moment too:

(http://doristars.com/v-web/gallery/albums/driftukround4/rxcrash.sized.jpg)

Nasty!! Hope your alright. (stiff neck?)

If i was you mate i\'d put it in a Corner somwhere untill you can lay your hands on a cheap Shell, If you go selling up it will cost you twice as much to build another car as you will make off it in bits?(Cheap skate T2 owners ;))

Chris

nooooooo.....so sorry to see that....trouble with the TII is its such a big unwieldy car to be throwing around. I agree with the holding out for a cheap shell....and then perhaps chucking evrything into that...

that said, if you do decide to break, ill defo have the lsd of you...

Christ the whole turbo 2 community is circling around leos car like vultures  :rollin

damn dude, how did that happen. i have that egi shell but it needs alot of work on rust underneath man you can have it once ive taken the parts off of it. its not the best shell in the world but it will do the trick i think. loads of welding.

dude you can fix that damage! doesnt look tooo bad actually,  you can get the replacement rear quarter panel for it from the dealers, i will have athe part number somewhere as it happens!


putting a thread up about "breaking his drifty" then people are going to post with whatever they need from it arnt they ?

as it happens dont worry bout the side skirts! (might have seen some other ones i like!) but i tell you what mate, you can have those front wings i got spare if you want. PM me if you want pics of the front wings. they need a little work...
 
:bandit  :yes

It don\'t look to bad but from my experiance you would still be best looking for a shell mate. The main reason being the lack of new 1/4 panels available through Mazda.

Looking at the Picture the back corner doesn\'t look bad but the thing that would worrie me is the crease over the Wheel i would go look inside for damage to the floor or inner panel? It looks like the impact has broke its back. but having said that pull your carpets etc up and have a good look also check the other side for 1/4 distorsion. I have learnt from the past that a picture of a damaged car can be made to look alot worse even if not done delibratly.

Does the tail gate gap still look about right?

Chris

I agree with Grizzly :)
When I mangked my first EGi, I kept it in the Garden for 6 months until I found another one, then swapped all the gear over, then broke up the egi and scraped the slightly dented bodyshell.

Quote from: one2watch....trouble with the TII is its such a big unwieldy car to be throwing around.

No its not!    :flamed

Leo/....dont part the car.....(know i will get flame now..haha) it will cost you even more to build the car like ur spec!!...just buy a T2 with a knackered...see them go for around 500-600 then just swap everything to that......

problem is where do i look for a t2 with dead engine, haven\'t seen any, and i think it will be too much work swapping everything over???

Well the thing is look at it this way, Buy a £600-800 running t2 then take the engine,Seats suspension off it and sell them on, now you are left with a Shell that stands you alot less (if you play your cards right).

Basicly it comes down to too things, A. Do you have some where out of the way to keep the damaged car while you get another shell/Save. B. Do you want the Agrovation? Basicly do you think it would be less work/Money stripping your car for bits and selling it starting with a new Slate then building another one at a later date?

i would go with the parts swapping idea

but you need

a : lots of space
b : lots of time

There is the other way of looking at it, Not too long ago FC3sLeo was thinking of Braking it anyway and figured the parts he had on the car where worth quite alot of money anyway. So if he did strip it there isn\'t alot that would have been damaged in the Crash?

Shell
Rear Suspension/Strut
Bumpers,lights and small stuff

So the easy option would be to sell up and move on which looking at the responce from the Title of the thread would make alot of people happy. But you may find your self out of pocket when your building a new car or left with parts that you struggle to sell?

If you are struggling for space why not strip all the good bits of the car then bin it, Buy another one in the near future and use them on that?

I\'ve done the swapping thing, If I were you I\'d get yours stripped of the parts you need to put on the new car and then get rid of the rest one way or another.  Then spend the next few months trawling the small adds and calling up the Specialists to see if they have anything that a customer has abandoned/ cant afford to get rebuilt.

I don\'t know what you have decided to do but here is some T2\'s that may intrest you?

http://cgi.ebay.co.uk/MAZDA-RX-7-TURBO-SPORTS-1989-RED-RX-7-RX7_W0QQitemZ4569467061QQcategoryZ18211QQrdZ1QQcmdZViewItem

http://cgi.ebay.co.uk/mazda-rx7-turbo-11_W0QQitemZ4569450922QQcategoryZ18211QQrdZ1QQcmdZViewItem

Damn, blown head gasket.  Do these people even bother to look under the bonnet?

Tell me about it !!

I never get board with Muppets who have no idea what they are talking about tring to tell you they had a T2 with Bigger Pistons and High lift cams in running more power that You!! You have got to Giggle..

You tend to find they usaly work as PR assistants in high volume Catering!

I\'ve had someone say:

"that\'s a 1.3 litre isn\'t it?  I had one but got it bored out to a 1.8, that was a quick car"  :rollin

I nearly laughed in his face!

Will

Last time I saw a bored out rotary it had been bored by the apex seals and had no compression.  Some of the Ebay adverts are pure magic though. :D :rollin

Just bringing this back from the dead. ;)

Have you decided what your doing with your Car? i would be intrested in buying your Damaged Shell if you do decide to brake it?

Chris

...waits for the FC crew to jump back on this thread....

i could do with some bits off it aswell :)

MMM gone very quiet, i think he may have it hidden away from Vulture T2 owners or maybe getting it repaired?

still trying to find a suitable shell for cheap before i start breaking it up, will a egi shell do the job???

Using an EGI shell just means you\'ll need to swap more stuff, Running gear,Possably the fuel tank??

But Yes it could be done. If you go on The US site there are loads of write ups on the T2 swap, its mainly becouse the US Verts where NA only (all EGI\'s) and the import cars have the steering wheels on the wrong side (In the US, :)HE HE....)

Chris

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=4575929548&ssPageName=STRK:MEWA:IT

Did think about it myself, the fact its an unusal colour and UK but i have too many cars at the moment so it may intrest you.

any news on this - the vultures are getting hungry :)

i am seriously thinking about breaking it now before winter, but i\'m think i\'m going to need some help breaking it. :confused:

Now watch the vultures descend............ :rollin
Might help if you list the toys.

Whats prompted the turn around btw?

Leo, just checked this, gutting!

Remember you buying good parts for it whilst in Japan this year, car has to be worth a bit if you do break but I would personally swap bits over to another FC.

Good luck.  :wave

just getting fed up with it, can\'t find a replacement shell and even if i did, i don\'t have the room to keep 3 cars and work on 2 at the same time. I\'ve got a list at home made up with prices and stuff, will have to post that up some point this weekend.

Or to save the hassle, price up all the parts and sell the car to someone here as a job lot for less than the price of individual bits. Let them do the breaking and selling.

did some one say cheap car ??

Quote from: FC3Sleoi am seriously thinking about breaking it now before winter, but i\'m think i\'m going to need some help breaking it. :confused:

email me at antnicuk@ntlworld.com
regards
Tony

got an indicator by any chance?  :cool

i really need a set of back boxes :)

He only has a single fitted anyway.

awww no fair - OK then - full system if the price is right !

Re-Amamiya Coilovers(height+damping+front camber)(rears are brand new units custom made by koni to re-A spec and not used yet) 350
Re-Amamiya front strunt brace 30
Cusco front lower arm brace 40
HKS EVC 5 250
HKS Hiper catback+3 inch dp+2 1/2 decat(make unknow) 300
OMP RS bucket seat 50
Willans 3point harness(aircraft style buckle) 40
Standard seat(very good condition no rips or tears) 50ea
Personal Steering wheel(90* dish+50mm spacer)30
Top secret gear knob 25
HKS type1 turbo timer 35
Blitz boost gauge 30
Cusco RS 2way LSD(only 200miles old)(includes the whole diff casing)  500
Attain Radiator Panel 35
HKS Racing Suction Induction Kit  80
HKS 200mm Replacement filter(red) 10
Cusco offset numberplate holder 10
HKS SSQV bov inc recirclate fitting and different fin 100
Interior and Body panel bits email me for prices, too many to list otherwise
Panasonic Touch Screen headunit 140
Exedy Cerametallic Clutch inc flywheel 80
Power enterprise oil filter 5
Attain Rear camber adjustment bar 50
Attain Rear toe steer eleminator 35
EnergySuspension Poly bush set 70
Kazama Tie rod ends 80
Drift Handbrake knob 10
Apexi SAFC 50
HKS watertemp adaptor 34mm 10
Standard TII wheelsx5 100
Sparco 6 spoke 16x7 and 16x8s 120
Engine (inc Attain duel pulley, de airpumped and blocked off plated, dynoed with induction kit and exhaust 220bhp at the wheels new plugs and filter) 550
Defi link meters set. Oil pressure(BF), Oil temp, egt, water, link controller and Greddy sandwich plate (on the car for a day only b4 the crash) 450
Spare Engine no compression on rear rotor Block only 150
Standard Turbo 50k 60

Prices are all ono. Might have missed someparts out will update again after i\'ve checked.

Will be willing to sell as a job lot if the prices is right. all this add up to £3975 b4 interior and body panels.

i\'ll have the shocks (coilovers) please, and i\'ll come and help you strip the car if you like

i\'ll also have the engine and the rear camber bar and the drifty handbrake button please.

if you have a good driver seat i will take that aswell.

i think thats the lot for me,   what no vultures????
I am assuming its first come first served,   i can come and collect aswell. :3gears-rh

if your bucket seat has a sidemount seat rail, ill take that off your hands

ta

damn you antick....i would have had them coilovers if ou werent so quick lol!

the bucket seat has standard seat rail modded to fit, so just take your old one out and bolt this one on.

antnicuk, your help breaking it will be great mate, will have to arrange it once most the parts are reserved. its first come first serve unless someone offers to buy the lot within this week,

Please copy paste the list with name next to what you want to reserve.

Cheers

does the modded rail allow the seat to sit straight?

if it does, then ill take the seat and rail off your hands.

also i can help you if you need a hand breaking it also?

Re-Amamiya Coilovers(height+damping+front camber)(rears are brand new units custom made by koni to re-A spec and not used yet) 350
Re-Amamiya front strunt brace 30
Cusco front lower arm brace  TREX -photo required
HKS EVC 5 250
HKS Hiper catback+3 inch dp+2 1/2 decat(make unknow) 300
OMP RS bucket seat 50  TREX - photo required
Willans 3point harness(aircraft style buckle) 40
Standard seat(very good condition no rips or tears) 50ea
Personal Steering wheel(90* dish+50mm spacer)  TREX - photo required
Top secret gear knob 25
HKS type1 turbo timer 35
Blitz boost gauge 30
Cusco RS 2way LSD(only 200miles old)(includes the whole diff casing) 500
Attain Radiator Panel 35
HKS Racing Suction Induction Kit 80
HKS 200mm Replacement filter(red) TREX  - photo required
Cusco offset numberplate holder 10
HKS SSQV bov inc recirclate fitting and different fin 100
Interior and Body panel bits email me for prices, too many to list otherwise
Panasonic Touch Screen headunit 140
Exedy Cerametallic Clutch inc flywheel  TREX
Power enterprise oil filter 5
Attain Rear camber adjustment bar 50
Attain Rear toe steer eleminator 35
EnergySuspension Poly bush set TREX - photo required
Kazama Tie rod ends 80  TREX - photo required
Drift Handbrake knob 10
Apexi SAFC 50
HKS watertemp adaptor 34mm  TREX
Standard TII wheelsx5 100
Sparco 6 spoke 16x7 and 16x8s  TREX - photo required
Engine (inc Attain duel pulley, de airpumped and blocked off plated, dynoed with induction kit and exhaust 220bhp at the wheels new plugs and filter) 550
Defi link meters set. Oil pressure(BF), Oil temp, egt, water, link controller and Greddy sandwich plate (on the car for a day only b4 the crash) 450
Spare Engine no compression on rear rotor Block only  TREX
Standard Turbo 50k 60

 Some photos of \'Lower arm brace\', Steering wheel, bucket seat, poly bush kit, hks spare filter etc will be appreciated for extra sales.

the seat is near straight, its adjusted on the holes on the side mount. (one side lower setting then the other to set straight)

in that case, i shall take it...just let me know when./...got stupid buiilders round my house all week so im home for the foreseeable future....

TRex, will take pics tomorrow, the omps will depends if one2watch wants them mate(he did offer first)

Re-Amamiya Coilovers(height+damping+front camber)(rears are brand new units custom made by koni to re-A spec and not used yet) 350 antnicuk
Re-Amamiya front strunt brace 30
Cusco front lower arm brace 40 Trex
HKS EVC 5 250
HKS Hiper catback+3 inch dp+2 1/2 decat(make unknow) 300
OMP RS bucket seat  sold one2watch
Willans 3point harness(aircraft style buckle) 40
Standard seat(very good condition no rips or tears) 50ea antnicuk(driverside)
Personal Steering wheel(90* dish+50mm spacer)30 Trex
\'NEW\' Top secret gear knob 25
HKS type1 turbo timer 35
Blitz boost gauge 30
Cusco RS 2way LSD(only 200miles old)(includes the whole diff casing) 500
Attain Radiator Panel 35
HKS Racing Suction Induction Kit 80
\'NEW\' HKS 200mm Replacement filter(red) 10 Trex
Cusco offset numberplate holder 10
HKS SSQV bov inc recirclate fitting and different fin 100
Interior and Body panel bits email me for prices, too many to list otherwise
Panasonic Touch Screen headunit 140
Exedy Cerametallic Clutch inc flywheel 80 Trex
\'NEW\' Power enterprise oil filter 5
\'NEW\' Attain Rear camber adjustment bar 50 antnicuk
\'NEW\' Attain Rear toe steer eleminator 35
\'NEW\' EnergySuspension Poly bush set 70 Trex
\'NEW\' Kazama Tie rod ends 80 Trex
Drift Handbrake knob 10 antnicuk
Apexi SAFC 50
\'NEW\'HKS watertemp adaptor 34mm 10 Trex
Standard TII wheelsx5 100
Sparco 6 spoke 16x7 and 16x8s 120 Trex
Engine (inc Attain duel pulley, de airpumped and blocked off plated, dynoed with induction kit and exhaust 220bhp at the wheels new plugs and filter) 550
Defi link meters set. Oil pressure(BF), Oil temp, egt, water, link controller and Greddy sandwich plate (on the car for a day only b4 the crash) 450
Spare Engine no compression on rear rotor Block only 150 Trex/Antnicuk
Standard Turbo 50k 60

Just a small update, forgot to mention some parts are actually new and still in box. Pics will be up tonight or tomorrow. ;)

HOW DID I MISS THIS :(

Can i have pics of :

Apexi SAFC - is this the orig or digital one ?
Re-Amamiya front strunt brace 30 - is this inc P&P ? ( should be a fiver )  

ta

stu
( i cant believe how quick you all jumped on this !! )

Sweet Jesus! Its like watching Pirrahnas strip a corpse!

SAFC is the 5 preset rpm point adjustment one(the one with the 5 turn knobs) would rather if parts are picked up from mine, can post if really wanted at added postage cost.

humm your bloody miles away - looks like no parts for me then :(

grinder, if you want, we can work the postage thing out.

Just let me know a day as soon as you have one and i will pop up for the day,  i have an engine hoist if required and most tools.  All you will need is somewhere nice and flat.

cheers matey - i will let the vultures get what they want first .. i some back boxes for the cab before i buy it a strut brace !!

i will keep an eye on the thread to see what happens though

i cant believe how fast this stuff was sold

i would ask for a 50% deposit of people before they come for the parts - i have seen this go tits up before ( AKA Gman\'s thread )

Take care matey

Stu

antnicuk, the car\'s on my driveway atm i quess thats flat enough, will let you know when i sort out a date. thanks again

no probs,   if you email at antnicuk@ntlworld.com as i cant PM you.
tony

when you get to the stripping down - can you check the turbo for me .. mine has a bit of play in it .. im hoping yours doesnt

can you pencil me in for that on the condition that there is no play in it

Cheers

Stu

( and i can offer you a £10 for the sandwich plate - based on no one buying the bundle )

the turbo for sell is off the spare engine, its in good condition with no play. will save the sandwich plate for you if i have to split the defi package.

OOOps,  i meant the dead engine, not the good one......  sorry, but i will fight it out with Trex anyway as he doesnt have a TII engine, he doenst need it!  Plus he is short :spank

dont spose your car had the front splitter did it? If it did and its half good, then ill prolly nick that too..

any ideas as to the condition of the good engine? Is it running ok? compression good?

btw my email is Lsun69@aol.com.

ah right :)

and its the right one for the S5 ??

its obvious that i cant come to you for it .. and you say ONO - what about £60 for the turbo INC P&P ( and i can wait to hear about the sandwich plate to save on postage )

Let me know

Ta

Stu

( you dont happen to have any back boxes do you ?? )

i do have the front splitter, its got a couple of cracks on it tho, engine wise, it was checked by wgt a week b4 the crash and it\'s all good then, the crash caused no engine damage.

grinder, the turbo is the S5 one, what do you actually need? just the turbo itself or with the manifold and stuff??? sorry, haven\'t got any standard backboxes. they rotted away long time ago

well as long as that front splitters in one single piece, i can always fill it and paint it myself....

how much you want for that?

having slept on it, ill prolly miss on the engine for now....mines seemingly ok and i might have an evil plan (piston?) for when it goes.....

Quote from: FC3Sleogrinder, the turbo is the S5 one, what do you actually need? just the turbo itself or with the manifold and stuff??? sorry, haven\'t got any standard backboxes. they rotted away long time ago

errr i would assume just the turbo .. mine has some play - so was just gonna swap that out

would it make a difference if it was to include the manifold and stuff ??? :)

its just the weight of the package i quess

Re-Amamiya Coilovers(height+damping+front camber)(rears are brand new units custom made by koni to re-A spec and not used yet) 350 antnicuk
Re-Amamiya front strunt brace 30
Cusco front lower arm brace 40 Trex
HKS EVC 5 250
HKS Hiper catback+3 inch dp+2 1/2 decat(make unknow) 300
OMP RS bucket seat sold one2watch
Willans 3point harness(aircraft style buckle) 40
Standard seat(very good condition no rips or tears) 50ea antnicuk(driverside)
Personal Steering wheel(90* dish+50mm spacer)30 Trex
\'NEW\' Top secret gear knob 25
HKS type1 turbo timer 35
Blitz boost gauge 30
Cusco RS 2way LSD(only 200miles old)(includes the whole diff casing) 500
Attain Radiator Panel 35
HKS Racing Suction Induction Kit 80
\'NEW\' HKS 200mm Replacement filter(red) 10 Trex
Cusco offset numberplate holder 10
HKS SSQV bov inc recirclate fitting and different fin 100
Interior and Body panel bits email me for prices, too many to list otherwise
Panasonic Touch Screen headunit 140
Exedy Cerametallic Clutch inc flywheel 80 Trex
\'NEW\' Power enterprise oil filter 5
\'NEW\' Attain Rear camber adjustment bar 50 antnicuk
\'NEW\' Attain Rear toe steer eleminator 35
\'NEW\' EnergySuspension Poly bush set 70 Trex
\'NEW\' Kazama Tie rod ends 80 Trex
Drift Handbrake knob 10 antnicuk
Apexi SAFC 50
\'NEW\'HKS watertemp adaptor 34mm 10 Trex
Standard TII wheelsx5 100
Sparco 6 spoke 16x7 and 16x8s 120 Trex
Engine (inc Attain duel pulley, de airpumped and blocked off plated, dynoed with induction kit and exhaust 220bhp at the wheels new plugs and filter) 550
Defi link meters set. Oil pressure(BF), Oil temp, egt, water, link controller and Greddy sandwich plate (on the car for a day only b4 the crash) 450
Spare Engine no compression on rear rotor Block only 150 Trex/Antnicuk
Standard Turbo 50k 60

Just a small update, forgot to mention some parts are actually new and still in box. Pics will be up tonight or tomorrow.
__________________

parts pics 1

parts pics 2

parts pics 3

parts pics 4

parts pics 5

Trex, i\'ll take pics for the wheels and hks adaptor later, battery ran out on the camera.

parts pics 6

some parts in the pics that are not in the price list email me for price and info

How much for the wheel nuts?

Chris

60 ono+p&p

they are expensive !

Do you know what they are? (locking wheel nuts) Seven sided instead of eight.

by the packaging id say theyre seven sided chris.

please let me know if you think the splitter is ok.

thanks

AAAHHHH  :reallymad  :reallymad  :reallymad  :flamed  :flamed  :bandit  :bandit  :bandit
WTF i blink and all the stuff disapears.

ah, ill just buy all new stuff.

im interested in the nuts too. i might come down with antnicuk to tear a few bits off.

excuse me,   there will be no tearing apart of any cars where i am concerned,  it will be systematic approach removing all parts in a logical manner! :bandit

I will bring the car roller if you like :D

yeh i noticed everything was gone in like a couple of minutes, then again i want my fc to remian as close to standard as poss. i hope it was worth breaking your fc!

hey that car roller is well cool!!! thats probably the most handiest thing you can have if you dont own a ramp!!!!!

one2watch, the splitter is in one piece, one of the bracket is bent and theres scrapes and 1 split. £20??? pick up only tho cos is quite big to post

theres still a lot of stuff on the list thats available and things like body parts and interior stuff and drivetrain stuff is all there to be broke.

if he doesnt have the splitter i will have it..  i didnt think about that!

ok put me down for the whole clock bit, you know the speedo, rev counter bit. the mirrors the trims round the windows the rear spoiler maybe? as i said ill come up with tony. are you going to the pod this sunday? it would be good to meet up for a chat. ill probably take most bits (if the price is right)

dont forget the nuts

What do you want for the Gearbox? Is it in good order?

Also the Vent from the Bonnet? Mine\'s Cracked.

don\'t think i\'ll be going to the pod on sunday, i am sure we can work something out for the parts you want.

ok. arrange whenever your going to get tony up to you and ill be there with him.

20 is fine, ill come and pick that up at the same time as the seat if thats ok?
im sure a bit of polyfilla will soon tidy up and scrapes.....

just email me and let me know when and ill be there lol!

that car roller is well cool btw....where dyou get that from??

Cusco front lower arm brace 40 Trex
Personal Steering wheel(90* dish+50mm spacer)30 \'cancelled\'
\'NEW\' Top secret gear knob 25
Attain Radiator Panel 35 \'photo please\'
\'NEW\' HKS 200mm Replacement filter(red) 10  Trex
Exedy Cerametallic Clutch inc flywheel 80  Trex
\'NEW\' Power enterprise oil filter 10 Trex \'added this\'
\'NEW\' EnergySuspension Poly bush set 70   Trex
\'NEW\' Kazama Tie rod ends 80  Trex
\'NEW\'HKS watertemp adaptor 34mm 10 Trex
Sparco 6 spoke 16x7 and 16x8s 120 Trex
Spare Engine no compression on rear rotor Block only 150 Trex

are you selling any plug leads ??

if so - what are they

Cheers

Stu

plug leads will go with the engine, they are standard ones only

Re-Amamiya Coilovers(height+damping+front camber)(rears are brand new units custom made by koni to re-A spec and not used yet) 350 antnicuk
Re-Amamiya front strunt brace 30 sold
Cusco front lower arm brace 40 Trex
HKS EVC 5 250
HKS Hiper catback+3 inch dp+2 1/2 decat(make unknow) 300
OMP RS bucket seat sold one2watch
Willans 3point harness(aircraft style buckle) 40
Standard seat(very good condition no rips or tears) 50ea antnicuk(driverside)
Personal Steering wheel(90* dish+50mm spacer)30
\'NEW\' Top secret gear knob 25 Trex
HKS type1 turbo timer 35
Blitz boost gauge 30
Cusco RS 2way LSD(only 200miles old)(includes the whole diff casing) 500
Attain Radiator Panel 35
HKS Racing Suction Induction Kit 80
\'NEW\' HKS 200mm Replacement filter(red) 10 Trex
Cusco offset numberplate holder 10
HKS SSQV bov inc recirclate fitting and different fin 100
Interior and Body panel bits email me for prices, too many to list otherwise
Panasonic Touch Screen headunit 140
Exedy Cerametallic Clutch inc flywheel 80 Trex
\'NEW\' Power enterprise oil filter 5 Trex
\'NEW\' Attain Rear camber adjustment bar 50 antnicuk
\'NEW\' Attain Rear toe steer eleminator 35
\'NEW\' EnergySuspension Poly bush set 70 Trex
\'NEW\' Kazama Tie rod ends 80 Trex
Drift Handbrake knob 10 antnicuk
Apexi SAFC 50
\'NEW\'HKS watertemp adaptor 34mm 10 Trex
Standard TII wheelsx5 100
Sparco 6 spoke 16x7 and 16x8s 120 Trex
Engine (inc Attain duel pulley, de airpumped and blocked off plated, dynoed with induction kit and exhaust 220bhp at the wheels new plugs and filter) 550
Defi link meters set. Oil pressure(BF), Oil temp, egt, water, link controller and Greddy sandwich plate (on the car for a day only b4 the crash) 450
Spare Engine no compression on rear rotor Block only 150 Trex
Standard Turbo 50k 60

Hi
Can you email me or let me know a rough date so i can make sure i\'m not working and get the tools required.
Regards
Tony

that hyper cat back exhaust is it a dual exit?? whts the condition of it like?

I remember Leos exhaust being a single exit last time i saw it at Silverstone :)

yup, the exhaust is the single passenger side exit one, it got a surface rust but overall in good condition. would you be interested in the decats and front pipe too?? Tony, i\'m starting my new job on tuesday so i\'ll let you know when i have days off so you can come down.

i could be interested in the down pipe if you fancy splitting it ??

you still got me pencilled in for the turbo and sandwich plate ??

yeh i would need the whole lot, can i have some pics please?

i ve pics of the decat and the cat back only, the downpipe still on the car.

yeh that will do mate. my downpipe is still in ok condition and i know what one of those looks like lol. can you post the cat back and decat pls?

Nas ,

if you are on about buying his full system - what are your back boxes like :D

Leo,   email me at antnicuk@msn.com and i will give you my phone number, it will be easier.
regards
Tony

grinder my back boxes only exist by name due to all the rust!

Leo just realised your not able to send pm\'s you can email me at  pugnacious @ donnycruise.com cheers matey.

has no one got a set of these in one piece :( - getting frustrated now :(

sorry for taking this off topic !!

Quote from: grinderhas no one got a set of these in one piece :( - getting frustrated now :(

sorry for taking this off topic !!

grinder youve got two hopes getting a pair of good condition 15 year old back box\'s
bob and no

just get some rear box\'s from anything ,cut off your mounts and weld them on the new box\'s to fit your car :yes

Are the Rear Brake Calipers up for grabs ? also interested in the Boost gauge.

one of the calipers is sold, the blitz boost gauge is still for sale.

What are you going to do with the Striped shell? Is it Rust free?

I may be intrested at the right money?

its in ok shape, underside a bit of rust but not bad, no holes etc etc.

Has it ever had any welding done?

How much would you be looking for it as a striped shell?

I would also be intrested in the gearbox and Bonnet vent. Is all the syncro\'s in good order in the Box?(don\'t crunch going in gear?). How much would you want for these bits as well?

Chris

Chrisleegtt@hotmail.com

gearbox is good, don\'t know how much i\'d want for the shell, depends on what you want with it, ie, drivechain stuff etc etc. 120 for the box?? and 30 for the vent?

With the shell it would be better for me if it was as striped as possable.

Have a think about it what you\'ll take for it.

Chris

Hi Leo,
Have you decided when you are going to break the car?
regards
tony

i was thinking the same thing  :wave

Quote from: TRexCusco front lower arm brace 40 Trex
Personal Steering wheel(90* dish+50mm spacer)30 \'cancelled\'
\'NEW\' Top secret gear knob 25
Attain Radiator Panel 35 \'photo please\'
\'NEW\' HKS 200mm Replacement filter(red) 10  Trex
Exedy Cerametallic Clutch inc flywheel 80  Trex
\'NEW\' Power enterprise oil filter 10 Trex \'added this\'
\'NEW\' EnergySuspension Poly bush set 70   Trex
\'NEW\' Kazama Tie rod ends 80  Trex
\'NEW\'HKS watertemp adaptor 34mm 10 Trex
Sparco 6 spoke 16x7 and 16x8s 120 Trex
Spare Engine no compression on rear rotor Block only 150 Trex

Trex, do you still want these? cos they are not on the car and you can pick them up whenever if you still want them

sorry haven\'t replied for a while guys, been away working.

if trex/dom doesnt want them - im in desperate need of a clutch :)

whats happeneing about the rest of the car?,  do i still get the shocks?

bump, TRex?? do you still want the parts? sorry for the delays of replys guys chistmas+catering= no time i am still looking at breaking the car unless someone wants to buy the lot, but looks like won\'t have time till new years now.

i could really do with a clutch matey :D

How do I contact you chief?

Quote from: TRexHow do I contact you chief?

...............The saga is just beginning!

i\'m still interested in the bits i originally put up for.....
antnicuk@msn.com

regards
Tony

email me on leoiu69@hotmail.com  everything is still there guys so please refer back to the sold list.

Quote from: grinder...............The saga is just beginning!

  :rollin  :rollin  :rollin    Nice shot matey.. nice one... well deserved..  :Laugh

Quote from: TRex:rollin  :rollin  :rollin    Nice shot matey.. nice one... well deserved..  :Laugh

your welcome matey :D

i hope you get what you need from leo

and do you REALLY need that clutch ?????

mine slips at anything above 5K in 3rd :(

May be interested in the oil cooler, front calipers and the strutt brace (Looks bent,  I just need the tower ends). Didnt have a cage did you?

Also, do you have the extra steering lock spacer Thingys in the rack?

I am putting together a Autotest/Rallycar so I may be interested in the "Drifty" chassis bits.

Personally, I think fix it, I hit a tree backwards and got my RX2 straight, Just need porta power and an oxy torch, several boofhead mates, Pizza for the formentioned mates, and a lot of patience .

//WWW.alliancemotorsport.org under kaptainballistik pictures, on the last page for my attempt.

Ps that was a good hit!

Quote from: FC3Sleoemail me on leoiu69@hotmail.com  everything is still there guys so please refer back to the sold list.

 You have mail...

so what parts it got left??

sorry for thread hijack,

i have 2 sets of front calipers if you are still looking for some, e-mail me at pattty252@hotmail.com

cheers

hi,
Attain Rear camber adjustment bar
Attain Rear toe steer eleminator
EnergySuspension Poly bush set
Kazama Tie rod ends
and cusco LSD is still for sale?price for the lot please
my mail:kamikz_@msn.com


and happy new year for all :cheers

regards

Calipers, how much!

drop me an e-mail and offer me a price, i am not sure what they are worth though, so just offer me, and i would need to check on postage, unless we can arrange for a pick up some how?!

Cheers,
Patrick,

Attain Rear camber adjustment bar sold Antnicuk
Attain Rear toe steer eleminator £35
EnergySuspension Poly bush set sold Trex
Kazama Tie rod ends sold Trex
and cusco LSD £500 inc casing

i need the indicator stalk

Ok can you post a picture of front strutts, I just got paid and the wifes in a good mood!  Ill take the strut brace if no one has got it. Also, I might take the other front caliper, How much (Only need one , will take both if they pull out)

has anyone bought the clutch yet ??????????????

the clutch is still there if you are talking about the exedy one, the strunt brace is gone, and the suspension is reserved atm

what comes with the clutch ??

is it the disc and cover thingy ?

how many miles are on it ?

it is ok for street driving or it it just for track/drag

any idea what BHP is can support at the fly

how come you are selling it with the fly wheel - is it a lightened one - or the stock flywheel ?

but im VERY interested :D

maybe we can come to a deal with the clutch and turbo :D - if im fitting a clutch on the drive , may aswell fit a turbo aswell eh :D

Stu

FC3SLEO you have a mail ;)

Quote from: FC3Sleothe clutch is still there if you are talking about the exedy one, the strunt brace is gone, and the suspension is reserved atm

for me so hands off please,

Leo, let me know whats going on with this and i will arrange collection/removal etc.
regards
Tony

So how much for the oil cooler

Leo matey ...

any chance of some info please buddy ...

Cheers

stu

BUMPTY BUMP

really need a clutch buddy

opps, sorry grinder, made a little mistake, just read the old posts, the exedy clutch is resevered for trex, but the standard one is available, only problem is, it\'s on the car. sorry about the confusion

leo

i know that Trex said he wanted it - can you confirm if he still does ?

im in desperate need and a stock one wont do

cheers

stu

*** edit ***

me again - not to sound out of line - how long are you gonna wait for Trex to get his stuff ?? - im really desperate - its slowly getting undrivable - i have the money waiting in the bank if you need a sale .. i dont want to step on dom\'s toes - at the end of the day its your choice really ... im just off to ban trex so that he cant reply !! LOL :D :D :D

Grinder, Trex has arrange to collect the parts on sunday, if he decides he don\'t want the clutch, then it\'s yours.

humm odds are he will take it :(

can you let me know please , when you know what he has taken - failing that looks like i will have to buy a new one ( or sell the rx :( )

cheers

stu :(

Stu, drop me a mail markparmstrong@hotmail.com as I may be able to get hold of one quite cheaply for you bud

you have mail ( about 1 hr ago actually :D )

Leo,
did you get my email?
regards
Tony

any news on the clutch leo ??

Cheers

stu

grinder, the clutch is sold i\'m afraid.

bloody typical :(

well this puts me right in the sh1t then :(

hummmmmmm , ok cheers matey

i have a clutch grinder! only 1550 and ill throw in a free black Turbo II

Is that dud motor available  ? I need some motor plates will pick up...

he\'s sold the dud engine already, but i have one lying around if you are interested, its all dismantled already, you can have it all, give me an offer, i have it stored in a garage in south london, give me an e-mail, and we can sort something out along with the calipers you were looking for,

cheers,
Patrick,

sounds good