More ports to show. These are normal streetport for a turbo II.
primary first
secondary port
Oh and me new tyres arrived today also:D
extremely sticky and extremely soft
very very soft.
Hi Brian,
like the tyres, ho wide are they?
So are you sticking to the TII engine block for your FC?, not following some and fitting an REW engine. What Turbo are you running?
At least this diff should stay in one piece, as its attached to the chassis.
£5 says he blows the diff out the casing.:D
QuoteOriginally posted by antnicuk
Hi Brian,
like the tyres, ho wide are they?
So are you sticking to the TII engine block for your FC?, not following some and fitting an REW engine. What Turbo are you running?
At least this diff should stay in one piece, as its attached to the chassis.
tyres are 275 width.
I only want 400rwhp in turbo II which the stock block in more than capable of handling. I\'m a bit funny about certain things.
If I have a fb I would only want a 12 a engine an fc an fc 13b t engine an fd a 13b rew engine. I\'m not into swapping plates etc.
That\'s just me though, no offence to anyone who does.
Turbo is a blitz k27 turbo.
I wnder what the odds are at william hill for my diff being intact by the end of rotorstock:rollin
QuoteOriginally posted by mattmaclennan
£5 says he blows the diff out the casing.:D
Who let you outa bed at this time?
Hey Matt do you wanna get your skate board out and hold on to my rear bumper down the strip, I think it would be good for a laugh:D
Hi Brian,
The 1st gen RX7\'s came out with production 13bs too you know!
Regards
Carl
Only if i can do a wheelie off your bonnet on my BMX! Got any fizzy pop?
Are them tyres road legal??
John
QuoteOriginally posted by 88GT-R
Are them tyres road legal??
John
from my understanding of legal yes!
When I sva test and mot cars the only requirement for road legal is that the tyre has a load rating, a speed rating and correct tread depth across the tyre.
Probably not for rotorstock which is what I guess your referring to?
I was planning on running in f1 class so I can whoop Tims purple hybrid phingy with a turbo bigger than his engine:D
Sounds good Brian. Yeah, i was refering for RS as they won\'t pass for F2. The Savanna cup is also up for grabs, for the quickest FC. A bit miffed that it was not included in the Rotary Revs/trophy line up.
John
QuoteOriginally posted by mattmaclennan
£5 says he blows the diff out the casing.:D
William Hill offer odds on 2-1 on the diff blowing and 10-1 against lol hahaha :rollin
QuoteOriginally posted by 88GT-R
Sounds good Brian. Yeah, i was refering for RS as they won\'t pass for F2. The Savanna cup is also up for grabs, for the quickest FC. A bit miffed that it was not included in the Rotary Revs/trophy line up.
John
I had already put up a prize for quickest turbo II ??
I guess I will have to change that then to something else:(
rgds
NO No No... The Savanna cup was presented last year, and i want to keep it going every year. Your prize is great, but you will probably keep that... If you want, i can present the Savanna cup to the quickest FC in the F2 class, or visa versa.
ok no probs. Actually I am not running my fc at rotorstock it is in no way setup for drag racing. Plus I need to get an ecu and get it mapped. I am waay behind time in getting the t51 ready at the mo due to some family problems of recent. So the turbo is gonna be neglected for a while until I get everything sorted on the t51. I might bring it down just for show though.
Brian,
Did a bit of port work for you...
lol nice Glen.
Actually th only reason it don\'t looks like that is that Tim scared me off with bad fuel consumption etc etc but my heart was set on a half bridge. I guess my wish has come true:D
rgds
QuoteOriginally posted by 88GT-R
Are them tyres road legal??
John
Be careful Brian, I believe they are dot marked but not e marked and tech could get a nick on uk rds.
QuoteOriginally posted by BNA_ELLIS
lol nice Glen.
Actually th only reason it don\'t looks like that is that Tim scared me off with bad fuel consumption etc etc but my heart was set on a half bridge. I guess my wish has come true:D
rgds
Brian Brian Brian, sounds like he is trying to slow you down :)
You are worried about Fuel Consumption!! :rollin :rollin :rollin
Brian your gonna need a bridge! Were just doing a half bridge FC for a customer. Has a T88 etc and should be rather rapid. Should be some good competiotion for your purple one.
The purple one isn\'t fighting, I don\'t have time to get water injection, ecu and get it mapped before rotorpop as I have too much left to do on the t51.:mad:
I\'d lay the smackdown on the t88 in my t51 though:D
(http://mustangandfords.com/techarticles/p63637_image_large.jpg)
There you go Brian.... a Ford 9 inch Diff, just what you need.:D
You sure thats not the inside of your head when you last had surgery?:rollin
QuoteOriginally posted by BNA_ELLIS
You sure thats not the inside of your head when you last had surgery?:rollin
Brian, come on! You know that Matt\'s head is EMPTY. :p
Fish
QuoteOriginally posted by Fish
Brian, come on! You know that Matt\'s head is EMPTY. :p
Fish
I know it was but recently I heard he had a transplant:D
No the surgery was ear drum replacement after listening to you going on about your imaginary dyno figures:D
Brian do u know Mark from "The Garage" ? lol
Quote from: interloper393Brian do u know Mark from "The Garage" ? lol
Not really I spent a few minutes speaking to the guy driving a gold gts at rotorstock, complementing him on a stunning car etc.
I don\'t remember his name now! I presume that\'s Mark?
he just said he knew a guy called Brian who has the worst luck with cars blowing up on him lol.. just a thought, it was u lol
Quote from: interloper393he just said he knew a guy called Brian who has the worst luck with cars blowing up on him lol.. just a thought, it was u lol
My cars don\'t blow up, but I have had some interesting diff incidents in my past. Don\'t listen to air head Matt on here.
I now launch my 500+bhp rx7 at 6500rpm
with a stock diff consistently, with no problems whatsoever, but I guess the reputation of my past will stick forever at least while Matts alive anyway :burnout
hehe soz didnt mean to offend :)
Brian,
any news on your TII?
regards
Tony
Quote from: antnicukBrian,
any news on your TII?
regards
Tony
Nope.
I been busy with other stuff. I still haven\'t ordered my ecu yet most do that tomorrow, engine is built and ported, just need to get it fitted back in the engine bay sometime in the next 2 weeks.
Cant wait to see this one in the flesh Bri :)