Title: New Toy for Rotorstock
Post by: Freddy on April 27, 2005, 09:14:51 PM
Post by: Freddy on April 27, 2005, 09:14:51 PM
Only 4 weeks or so to go guys. :)
Title: New Toy for Rotorstock
Post by: babz_audio on April 27, 2005, 09:16:52 PM
Post by: babz_audio on April 27, 2005, 09:16:52 PM
WTF...never seen that before in an rx7...more pics please, and spec...cus with fuel lines like that it must have nice spec :D
Title: New Toy for Rotorstock
Post by: Freddy on April 28, 2005, 10:27:20 AM
Post by: Freddy on April 28, 2005, 10:27:20 AM
Will take more pics. Shhht on the spec for now. :evillaugh
Title: New Toy for Rotorstock
Post by: DRAGON on April 28, 2005, 10:40:44 AM
Post by: DRAGON on April 28, 2005, 10:40:44 AM
MOREPICSPLEASE!
Title: New Toy for Rotorstock
Post by: Glenn Butcher on April 28, 2005, 12:38:39 PM
Post by: Glenn Butcher on April 28, 2005, 12:38:39 PM
You using the Mazda internal pump as a pre-pump Freddy?
Make sure (if you don\'t already!) check your fuel pressure when tuning it on the dyno.
Make sure (if you don\'t already!) check your fuel pressure when tuning it on the dyno.
Title: New Toy for Rotorstock
Post by: Initial-D on April 28, 2005, 01:01:07 PM
Post by: Initial-D on April 28, 2005, 01:01:07 PM
Lol!! Your such a tease!;)
Showing pics of my car like that.... (ha haa not really folks):p
You have a half cage going spare BTW?
Sorry I missed you the other day on MSN, my computers always on at home downloading BMI, Hot version torrents lol! So unless I remember to switch it offline you\'ll probably think I\'m there!!
Showing pics of my car like that.... (ha haa not really folks):p
You have a half cage going spare BTW?
Sorry I missed you the other day on MSN, my computers always on at home downloading BMI, Hot version torrents lol! So unless I remember to switch it offline you\'ll probably think I\'m there!!
Title: New Toy for Rotorstock
Post by: Wav on April 28, 2005, 01:21:12 PM
Post by: Wav on April 28, 2005, 01:21:12 PM
Interesting Freddy, veeeeeery interesting:bandit
Paul:D
Paul:D
Title: New Toy for Rotorstock
Post by: gsb876 on April 28, 2005, 08:05:14 PM
Post by: gsb876 on April 28, 2005, 08:05:14 PM
Hmmmmmmmmm ????? ;)
Title: New Toy for Rotorstock
Post by: scooby_si on April 28, 2005, 08:18:29 PM
Post by: scooby_si on April 28, 2005, 08:18:29 PM
is this what it is? (http://161.58.5.90/austin/swedish.wav) 
Si
Si
Title: New Toy for Rotorstock
Post by: antnicuk on April 28, 2005, 08:37:25 PM
Post by: antnicuk on April 28, 2005, 08:37:25 PM
QuoteYou using the Mazda internal pump as a pre-pump Freddy?
it doesnt look like the stock one, you can just see some heat sink which might be a pump, that looks like it feeds it.
that is quite a small swirl pot for the draw those two pumps must have, i would always be worried that it would empty, i bet it must flow enough fuel for 3 cars.
is it noisy?
this works, two bosch in tank pumps, enough fuel for 1000 bhp and no noise!
Title: New Toy for Rotorstock
Post by: Freddy on April 28, 2005, 09:46:30 PM
Post by: Freddy on April 28, 2005, 09:46:30 PM
QuoteOriginally posted by antnicuk
two bosch in tank pumps, enough fuel for 1000 bhp and no noise!
Is that a pic from the 3 rotor project antincuk?
antincuk is right. I was initially contemplating using the internal pump as pre pump and then decided against.
Pip will have a brief taming session with the car in a couple of weeks and we can make some changes from there. ;)
The swirl pot has proved quite capable. At least for now with the twin fuel system there\'s not much noise and no plans of going for bigger.
Water injection being installed next week, ABS removed and a/c along with host of other bits being added and then post a picture of engine.
Attached are a couple more pictures of interior.
:)
NB Ben mate, no half roll cages I\'m afraid. Although I\'ve have a few bits on order from Panspeed. I could ask if they have anything in stock and put in the same box as my stuff?
Title: New Toy for Rotorstock
Post by: gsb876 on April 28, 2005, 09:48:11 PM
Post by: gsb876 on April 28, 2005, 09:48:11 PM
Send me a pic of the car Freddy dude, see what its like ??
Title: Getting There.
Post by: Freddy on May 23, 2005, 01:58:59 PM
Post by: Freddy on May 23, 2005, 01:58:59 PM
Been on the rollers. Still a lot to do before RS. ;)
Title: New Toy for Rotorstock
Post by: babz_audio on May 23, 2005, 02:11:21 PM
Post by: babz_audio on May 23, 2005, 02:11:21 PM
looking deadly freddy..so wen do i get a go? :D
Title: New Toy for Rotorstock
Post by: Kieron on May 23, 2005, 04:28:21 PM
Post by: Kieron on May 23, 2005, 04:28:21 PM
QuoteOriginally posted by scooby_si
is this what it is? (http://161.58.5.90/austin/swedish.wav)
Si
I dont know what you mean, this sort of thing isnt my bag baby :D
Back on track, that car looks like its gonna do some business next weekend!
Cant wait to see it in action
Title: New Toy for Rotorstock
Post by: Freddy on May 24, 2005, 01:35:39 AM
Post by: Freddy on May 24, 2005, 01:35:39 AM
QuoteOriginally posted by babz_audio
looking deadly freddy..so wen do i get a go? :D
Think I\'ll wait till you first get to grips with the 425hp Pip mapped for you :p
Are you running at RS? See you at the convoy. ;)
Title: New Toy for Rotorstock
Post by: MattR on May 24, 2005, 09:36:02 AM
Post by: MattR on May 24, 2005, 09:36:02 AM
Haha freddy!! Sounds lik ya getting these guys worried;) ;)
If only they knew!!
Which convoy u doing??
Cheers
Matt R
If only they knew!!
Which convoy u doing??
Cheers
Matt R
Title: New Toy for Rotorstock
Post by: babz_audio on May 24, 2005, 02:21:33 PM
Post by: babz_audio on May 24, 2005, 02:21:33 PM
hey, come on...was 440bhp, Pips machine was out :p
and yes, i should be running at RS :D
and yes, i should be running at RS :D
QuoteOriginally posted by Freddy
Think I\'ll wait till you first get to grips with the 425hp Pip mapped for you :p
Are you running at RS? See you at the convoy. ;)
Title: good times
Post by: normski on May 24, 2005, 10:34:29 PM
Post by: normski on May 24, 2005, 10:34:29 PM
Looking at this lot, Theres going to be some very quick runs this year! :cheers
Title: yeah right
Post by: Freddy on May 28, 2005, 01:08:40 AM
Post by: Freddy on May 28, 2005, 01:08:40 AM
Lots to do and so little time. Hoping for some fast results as theres just over 12 hours of work left to be done. Including mapping, fitting braces, New Radiator and the list goes on. Not happy Jan.
:(
:(
Title: New Toy for Rotorstock
Post by: Initial-D on May 28, 2005, 11:33:10 AM
Post by: Initial-D on May 28, 2005, 11:33:10 AM
Stick with it and get as much complted as possible!! At least you\'ll have an FD so your one up on me lol!;)