As the title says.
Interested, as i\'m getting mine ported next week-Street i think
Cheers
Pete
Yep it will change your exhaust note slightly, all depends on the size of the port and the exhaust system your using. Personally the louder the better is my preference!! Go for a straight thru exhaust system and I\'d of thought you\'d notice it more, of course you\'d need a PFC if doing so.
It will also make the car sound like pure evil when idle.
Evil Idle sounds good!!:D
My exhaust system is a big downpipe from me Garrett GT40-Feed mid silencer and RB single Catback-so not loud really!
Pete
For best results I recommend removing the turbo and fitting a straight through exhaust system, ala my egi. Then go find a long high speed tunnel to play in! :D
QuoteOriginally posted by PETE SMITH
As the title says.
Interested, as i\'m getting mine ported next week-Street i think
Cheers
Pete
Pete,
It can change it an a big way really, if you have large intake and exhaust ports, idle may not be the hmmmmmmmmmmmmmmmmmmm, but more of a brap brap brap etc.
Combined with a larger turbo and a straight through exhaust it can quickly become a little too loud! :)
I\'ve got a ported engine and a striaght through exhaust, includin downpipe.
It is ****ing deafening and howls like a banshee. It also occasionally gices out huge bangs and ejects rather large flames from the exhaust. The idle is really really menacing. Anyone sat at the lights thinking about offering you a race tends to think twice when they hear it growling.
Hey, i\'m getting a bit excited now!
Looking forward to seeing how mine will sound in a week!
Pete:p
Hi Pete
Just got mine back from the same place yours is now ........ with a somewhat extended port, you will not be disappointed:D
Hijack alert!
Interested to know what you have had done John, specifically about the street port with the stock non-sequential twins you are running. How is it?
Slight port change sound on this video:
http://www.mazdarotaryclub.com/forums/showthread.php?threadid=12724&referrerid=1
Sweet, anyone else with mpegs or sound clips etc of ported engine sounds?
BRAP BRAP BRAP!
\'Cheers\'..... :spank
If you want vids why don\'t you go and look for \'em you gimp.
QuoteOriginally posted by MillSpeed
If you want vids why don\'t you go and look for \'em you gimp. ?
More handbags today then?????????
QuoteOriginally posted by Big Stu
More handbags today then????????? [/B]
Ha ha, you knows it! :D
QuoteOriginally posted by MillSpeed
Ha ha, you knows it! :D
:rollin :rollin :rollin :rollin :rollin :rollin :rollin
QuoteOriginally posted by MillSpeed
If you want vids why don\'t you go and look for \'em you gimp.
You don\'t have to be a Pr*ck!
Just asked a simple question!!
Yes I searched and found a few, but some may have a collection saved or have some that I have not been able to find!
You are a fine example of bringing people to the club, forum and helping and sharing with others to learn about the cars etc.
How old are you and how do you feel now! :rolleyes:
rgds
Mate, you started it making sarky comments like \'cheers\'. I\'ve noticed you being offhand with people before & I thought I\'d pull you up on it this time. No need to get out of your pram.
Is it that time of the month???
seems to be a bit of bickering going on at the mo.
QuoteOriginally posted by chrisBoid
Hijack alert!
Interested to know what you have had done John, specifically about the street port with the stock non-sequential twins you are running. How is it?
Hi Chris
The original engine [which is going to be used on an other project] was my 98 unit which after 50k miles I had pulled by REworx and re-build by Carl Hayward with an extended street port, I should point out this was done purely for the additional power and not because I had issues, after the specified run in it was mapped using 1200 secondaries by REworx and produced 317atw [dyno dynamics] 342ath[abbeys] further mods were tried to improve the power 1 of which was going non-sequential although it did not improve the final output it did increase the lower power delivery[my feeling is you wont see much more than that, the turbos wont allow the flow], was great on the street and up the strip but, I was never going to see the power a well set up single would produce, hence the new set up with rather nice porting, doweling and a few other bits and pieces [running in at the mo should be mapped next weekend :cool ]
John : I can\'t wait to see how your new spec turns out, be sure to do a full write up :)
QuoteOriginally posted by Big Stu
Is it that time of the month???
seems to be a bit of bickering going on at the mo.
Yeah, you could have a point there Stu!
Wot with this and the argument about the Skyline Dyno figures thread, i\'m feeling nervous about posting!!:eek :eek
Maybe a mellow beer is needed...:guinness
Pete
Nah Pete, say what you mean and hope everyone agree\'s. You wont be dissapointed with Dr. Geffs operation on yours:wave