Need to take out the radiator of my 3rd gen rx7 to get it repaired.How is the easiest way please.
Also If it cant be repaired, whats the best option?
Rotecnix ? £199 , WGT autos aluminium rad £275? HELP
Thanks
New to the site so any help would be great::)
If you look your local Thompson or local paper etc you should find a local radiator company that will recore your unit for less probably , if possible try and get them to fit a larger core ( 1 row extra ) as this will help cooling.
Also this may help,
Take all the "plastics" off , air intake ,air filter box , battery , ands the battery tray , all this to get to the 6mm nuts that are facing upwards ( 10mm spanner size )
Then after disconnecting the hoses remove the anti roll bar and lower rad support brackets then slide down and out towards the crossmember .
Also go to
http://www.rx7turboturbo.com/robrobinette/notes_engine.htm
Not a quick job but l hope this helps,
All the best Clive
clive@mazdarotaryclub.com
//www.mazdarotaryclub.com
Thanks for the advice so quickly.
really appreciate it
Darren