Does anyone know if K&N do an induction kit for the Turbo 2? I can only find them for the non turbo model.
Any links would be great.
Cheers,
Rob.
Yeah i think rotechniks do them.
If you are going to do it, make sure you get some cold air feed to the filter, if you cant then stick with a performance panel filter. :)
What do you mean by \'cold air feed\'? like removing one of the small headlights? Does the panel filter fit in the original airbox? dsoes it make much difference
Rob.
Like this
Engine
QuoteOriginally posted by fatfingers
Does anyone know if K&N do an induction kit for the Turbo 2? I can only find them for the non turbo model.
Any links would be great.
Cheers,
Rob.
Hi Rob,
We are official K&N distributors and l have looked up the T11 and they only do a panel for the air box.
However if you still wish to do this all you will have to do is take out your air box and measure the intake where it joins the air box and then you can fit a K&N cone or another make of cone filter, you will just need to make a braket to support the air flow meter so it doesn\'t float around.
One word of warning though my T11 had the air box removed and l found the intake noise very in the car with you.
And it\'s also worth knowing that a panel filter in a stock air box on a 2nd Gen works very well, when l had an EGI it not only made a big difference when l put a good filter in it, l could also feel the difference in performace every time after it was cleaned.
Hope this helps,
Cheers Clive.
how much for a panel filter then clive ?