Text only | Text with Images

Mazda Rotary Club

General => General Technical => Topic started by: bnaellis on May 31, 2003, 12:54:54 AM

Title: name these parts
Post by: bnaellis on May 31, 2003, 12:54:54 AM
Hi all,

Do any of you gu\'ys know what the part is fitted on the top left of the engine bay with the braided hose attached to it.  Also it goes to something else on the other side of the engine bay I don\'t know what this is either please can someone advise.

rgds
Title: name these parts
Post by: bnaellis on May 31, 2003, 12:56:08 AM
here\'s another shot of it.
Title: name these parts
Post by: bnaellis on May 31, 2003, 12:56:57 AM
and another.
Title: ....
Post by: samfc3s on May 31, 2003, 07:11:35 AM
i think they just relocate the oil filter so it is easier to change and that coul dbe why braided hose attached to it...


sam
Title: name these parts
Post by: Fish on May 31, 2003, 07:54:45 AM
I agree with Sam, looks like a relocation kit. The middle picture tells more details, looking at the location its where the oil filter goes.

Dan
Title: name these parts
Post by: DRAGON on June 03, 2003, 12:25:20 PM
HKS remote filter kit.
Title: name these parts
Post by: bnaellis on June 03, 2003, 06:15:44 PM
Thanks for all the replies what\'s the use of a remote kit ??
I can\'t see the advantage ??

rgds
Title: advantage
Post by: samfc3s on June 03, 2003, 06:32:00 PM
the most obvious advantage is that u can access to the filter a lot more easily when u want to change it!!!!



sam
Title: name these parts
Post by: MikeLMR on June 03, 2003, 06:34:48 PM
I didn\'t think they were that bad to get too ... certainly not worth all that £££\'s for braided hoses and stuff. I would have thought there would be another reason, like you can fit a larger filter ?
Title: name these parts
Post by: Fish on June 03, 2003, 07:16:02 PM
Brian, ease of change for the filter. Mike if you wanted to run a bigger filter, looking at some old US posts you could run a 12A filter.

When you think that the FD\'s filter is the same size as an MX-5\'s. Seems a little small for a performance car.

Dan
Title: name these parts
Post by: bnaellis on June 03, 2003, 07:47:06 PM
Talk about the owner going over the top, as mike said they are pretty accessable. Then I guess he takes his car to a garage to get work done so it\'s of no use to him but rather his mechanic if it\'s just ease of fit?? Mayve it\'s been relocated as there is something fitted in the oil filters original position. What they may be I have no idea.

rgds
Title: name these parts
Post by: MikeLMR on June 03, 2003, 10:07:37 PM
maybee its another engine dress up thing ? lots of shiney hose = more HP :D

As for the oil filters being small , they are the same oil filter for the whole mazda range ( I use the same one on my 1st gen, my 323 and my dads 626 which is a span of 10 years ! ) and I have been assured by Mazda (via my Dad who used to work for them) that the small filters have more filter area and perform better than the old "big" filters

Depends on who you trust ... the big filters are still available from FRAM etc. but having seen an engine failure from a poorly designed pattern part oil filter I would never skimp on what is such a cheap item in the first place.

Mike
Title: name these parts
Post by: bnaellis on June 05, 2003, 09:21:59 AM
Found out that this is an omori relocation kit by the way.

rgds
Text only | Text with Images