Title: Changing gearbox fluid, how & any fluid recommendations?
Post by: scooby_si on October 31, 2004, 09:06:22 PM
Post by: scooby_si on October 31, 2004, 09:06:22 PM
Just looking at changing my gearbox fluid & was looking for how to do this & any cunning plans on which fluid?
I see Gary does some "max" (Royal purple) variety which i presume is pucker just wondered if there were any preferences amongst you folks?
Already had diff oil replaced earlier in year presume that has no relevance wotsoever.....
Si
I see Gary does some "max" (Royal purple) variety which i presume is pucker just wondered if there were any preferences amongst you folks?
Already had diff oil replaced earlier in year presume that has no relevance wotsoever.....
Si
Title: Changing gearbox fluid, how & any fluid recommendations?
Post by: scooby_si on November 01, 2004, 12:19:24 PM
Post by: scooby_si on November 01, 2004, 12:19:24 PM
roll up roll up dont be shy (http://www.click-smilies.de/sammlung0304/sehrgrosse/large-smiley-058.gif)
SI
SI
Title: Changing gearbox fluid, how & any fluid recommendations?
Post by: Den on November 01, 2004, 12:40:54 PM
Post by: Den on November 01, 2004, 12:40:54 PM
Did mine about 3 months ago and used redline mt90. It used to grind when going into 2nd sometimes but didnt do it once after i put the redline in, felt alot smoother all round aswell.
I cut a hole in the cap of each bottle and taped a hose about 2m long to it then dropped the hose down to the box from the engine bay. I stayed under the car making sure the hose stayed in the filler hole while my \'assistant\' tipped the bottle upside down and punctured a hole in the bottom. It worked great and saved me a few quid on a fluid pump :D
I cut a hole in the cap of each bottle and taped a hose about 2m long to it then dropped the hose down to the box from the engine bay. I stayed under the car making sure the hose stayed in the filler hole while my \'assistant\' tipped the bottle upside down and punctured a hole in the bottom. It worked great and saved me a few quid on a fluid pump :D
Title: Changing gearbox fluid, how & any fluid recommendations?
Post by: MillSpeed on November 01, 2004, 01:09:15 PM
Post by: MillSpeed on November 01, 2004, 01:09:15 PM
Den, that\'s good to hear. My second gear crunches and I\'d thought about switching to redline in an attempt to cure it. Will defo do it now!
Title: Changing gearbox fluid, how & any fluid recommendations?
Post by: Wav on November 01, 2004, 03:51:15 PM
Post by: Wav on November 01, 2004, 03:51:15 PM
Nice one Dean, how many quarts did it use? and is it obvious when it is full? I bought 3 quarts of MT90 a few months ago now and still haven\'t had chance to put it in yet :rolleyes:
Cheers,
Paul:)
Cheers,
Paul:)
Title: Changing gearbox fluid, how & any fluid recommendations?
Post by: scooby_si on November 01, 2004, 06:14:14 PM
Post by: scooby_si on November 01, 2004, 06:14:14 PM
OK you knowledgable folks seem to be getting ahead of yerselves where do i need to stick what in which hole & what buttons sump plugs or otherwise do i need to press loosen or otherwise first before filling with this technique?
Si (AKA gearbox virgin
)
Si (AKA gearbox virgin
)
Title: Changing gearbox fluid, how & any fluid recommendations?
Post by: Den on November 01, 2004, 10:09:51 PM
Post by: Den on November 01, 2004, 10:09:51 PM
Appologies, i did get a bit ahead of myself there... This is for an fc btw.
On the gearbox there are 4 plugs, 2 on the side and 2 on the bottom. The 2 on the bottom are drain plugs, one of the side ones is for the filling point and the other side one is for the check hole. Start by removing the two on the side, then with a container at the ready remove the bottom two. Once the old oil is out use some sealant on the bottom two plugs and replace them. If i remember right there\'s a crush washer on the larger drain plug, this should be replaced aswell. Now comes the bit i mentioned before with the length of hose and assistant etc. Place the hose in the hole on the side of the box which is closest to the engine then start filling it up. When the oil starts to drip out of the other hole its full. Replace the two plugs you have left using more sealant and thats it. It took nearly 3 quarts to fill but i did spill a little.
On the gearbox there are 4 plugs, 2 on the side and 2 on the bottom. The 2 on the bottom are drain plugs, one of the side ones is for the filling point and the other side one is for the check hole. Start by removing the two on the side, then with a container at the ready remove the bottom two. Once the old oil is out use some sealant on the bottom two plugs and replace them. If i remember right there\'s a crush washer on the larger drain plug, this should be replaced aswell. Now comes the bit i mentioned before with the length of hose and assistant etc. Place the hose in the hole on the side of the box which is closest to the engine then start filling it up. When the oil starts to drip out of the other hole its full. Replace the two plugs you have left using more sealant and thats it. It took nearly 3 quarts to fill but i did spill a little.
Title: Changing gearbox fluid, how & any fluid recommendations?
Post by: scooby_si on November 01, 2004, 10:27:32 PM
Post by: scooby_si on November 01, 2004, 10:27:32 PM
Now this gearbox thing you mention that\'s the thing on the end of the gearstick init? :rollin lol
So erm anyone know how/if that varier for FD?
Ta
Si
So erm anyone know how/if that varier for FD?
Ta
Si
Title: Changing gearbox fluid, how & any fluid recommendations?
Post by: oilman on November 02, 2004, 04:18:54 PM
Post by: oilman on November 02, 2004, 04:18:54 PM
My book says fully synthetic 75w-90. Use a good one.
Cheers
Simon
Cheers
Simon
Title: Changing gearbox fluid, how & any fluid recommendations?
Post by: scooby_si on November 02, 2004, 08:09:37 PM
Post by: scooby_si on November 02, 2004, 08:09:37 PM
cheers mate think i\'ll get me an order placed with Gary soon......
Si
Si
Title: Changing gearbox fluid, how & any fluid recommendations?
Post by: scooby_si on November 10, 2004, 12:32:05 PM
Post by: scooby_si on November 10, 2004, 12:32:05 PM
anyone else got tips, descriptions of what where &/or pikkies wood be good for the FD i just wana have as much info as possible so while i presume it\'s obvious to any mechanic where is the gearbox even & how you get to the necessary bits?
Ta
Si
Ta
Si