Hey all, has anyone raised their boost levels using their Apexi FC controller? The insturction manual says to adjust the base setting aswell , but to what?
My reading at the mo is ;
BOOST: BASE SETTING:
1. pr 0.8kg/cm2 56%
sc 0.7 64%
2. pr 0.9 62%
sc 0.8 70%
This is the same reading as in the manual.
Is it ok to change no.1 to this:
1. pr1.0 68%
sc0.9 76%
Is it safe to do this without adjusting anything else?
My boost at mo is about 0.75- 0.55- 0.8
All replies gratefully received..:D