Author Topic: Fitting a series 2 rear axle to an fb  (Read 59 times)

Offline Chris shrewsbury

  • MRC Full Club Member
  • Newbie
  • *****
  • Posts: 10
  • Karma: +0/-0
  • Just joined!
    • Shrewsbury Shropshire
    • View Profile
Fitting a series 2 rear axle to an fb
« on: July 09, 2019, 07:25:55 AM »
Has anyone fitted a fc rear end to an fb if anyone has any info that would be great

Offline clive

  • MRC Founder
  • Administrator
  • Major Contributor
  • *****
  • Location: Kent
  • Posts: 10,226
  • Karma: +28/-0
    • View Profile
    • http://mazdarotaryparts.com
Re: Fitting a series 2 rear axle to an fb
« Reply #1 on: July 09, 2019, 08:16:19 AM »
When you get the car you will find that fitting a T11 suspension/ axle assembly will be a huge undertaking.

The axle under the car will get the car up and running then maybe look at something like an american  8" axle which should be found at  an Amercan car breakers over here. Or perhaps a 3 litre Capri axle which may do.
The axle will need some proper engineering with the axle narrowed and half shafts shortened then brackets made to adapt your suspension links.       
All the best Clive

Offline re japi

  • MRC Overseas Guest
  • Major Contributor
  • ****
  • Location: Hämeenlinna, Finland
  • Posts: 3,273
  • Karma: +20/-0
    • View Profile
Re: Fitting a series 2 rear axle to an fb
« Reply #2 on: July 09, 2019, 09:14:49 AM »
Bro put FDs whole rear subframe, suspension, diff and so on to his FB...

Massive job, original frame had to be cutted cause he made basically subframe to FDs subframe. They all are bolted it to custom made frame. Also, shock towers are heavily modified.

My opinion is that there is no need to do that if you dont have really good reason, like building a race car. As for street, stiff rear is still ok, and gives you better traction off the line if its made correctly...

Lähetetty minun G8141 laitteesta Tapatalkilla

Power is nothing without control. Weight is enemy of performance, handling and braking.

http://s1293.photobucket.com/user/japi_laukkanen/library/Japi?sort=3&page=1

Offline re japi

  • MRC Overseas Guest
  • Major Contributor
  • ****
  • Location: Hämeenlinna, Finland
  • Posts: 3,273
  • Karma: +20/-0
    • View Profile
Re: Fitting a series 2 rear axle to an fb
« Reply #3 on: July 09, 2019, 09:19:30 AM »
I dont have any better pics of it...

Lähetetty minun G8141 laitteesta Tapatalkilla

Power is nothing without control. Weight is enemy of performance, handling and braking.

http://s1293.photobucket.com/user/japi_laukkanen/library/Japi?sort=3&page=1